| Used
Textile Machinery for Carpet Production Gebrauchte Textilmaschinen für die Teppichherstellung 1 pc. flocking line for door mats SCHENK (Ref. No. 7143956) year of construction end of 80s has been used in production for approx. 3 to 4 years only previously used to flock design on door mats of size: 500 x 700 mm, 600 x 900 mm or two pieces of 400 x 600 mm suitable for electro static multi colour flocking 1 pc. carpet shearing machine MENSCHNER (Ref. No. 5243471) 5000 mm working width, year of construction 1978 three shearing cylinders 1 pc. Continue Dyeing Line KÜSTERS / MITTER (Ref. No. 7173257) 5150 mm max. material width, year of construction mainly 1993 dye preparation made by PESCH in 1983, incl. electr./pneum. crane unit for rolls, 2 x 0,5 t made by STAHL FÖRDERTECHNIK, conversioned in 1993 edge controlled unwinder, max. 1.600 mm roll diameter, made in 1979 J-Box made by KÜSTERS, capacity depending on carpet ABK beater made by ABK for carpet preparation on both sides including suction and filter Jet-Bulker made by KÜSTERS, modernized in 1993 Fluicon made by KÜSTERS optional available (not installed in line), Turning Frame made by KÜSTERS, reconditioned in 1993 Foulard made by KÜSTERS, reconditioned in 1993 Dyeing Preparation DIS Dalton, made in 1993 Printing Line made by MITTER with 6 rotary printing templates, (expandable to 8 colours) GUM applicator with dosage station made by FAP Dye Application device (Quick-Change) made by KÜSTERS Cloud-Control Steamer made by KÜSTERS for colour finishing, Year of construction 1993 Hot Spray Station with suction made by KÜSTERS Washing Unit with speed up, heat exchanger and suction made by KÜSTERS Year of construction 1993 1 pc. punching machine for tiles (Ref. No. 5202051) year of construction ca. 1980 400 x 400 mm tile size, guillotine type, used for trials only 1 pc. winder ETF (Ref. No. 5112393) 1 pc. recycling line to recycle carpet waste PALLMAN (Ref. No. 1112871) year of construction 1992, consisting of: hacker, agglomerator, hot granulator, screw, intermediate tank, fine mill (The recycling line is suitable to recycle coated carpet waste to produce a granulate which will be used as an additive in the new carpet coating process.) 1 pc. complete carpet factory (Ref. No. 8112896) 1 pc. tufting machine CMC OMNI-GRAPH (Ref. No. 6122101) 24 " working width, year of construction 1995 - NEVER USED special 1/10" gauge, 240 needles, cut pile sample Omni-Graph tufting machine equipped with two computer controlled sliding needle bar attachments, yarn feed (front and rear) CMC's Advanced cutting system II and complete with 1/2 H.P. gear motor drive, as new, never used 1 pc. carpet back coating line ARTOS (Ref. No. 7142915) 5200 mm working width, year of construction 1969 consisting of: roll unwinder, pile turner, J-Box, steamer, foulard Pflatsch device, stenter pre dryer (4fields), foam rakel infra red field, coagulate channel (2 fields), ARTOS embossing device stenter frame vulcanization channel (9 fields) cooling shouwer (3 zones), accumulator, edge trimmer / cutting device winder (2 rollers) 1 pc. PU coating line CAMPEN (Ref. No. 7142648) year of construction 1987 TDI spraying device made by WTS (Weidmann) Space demand: 32.000 mm x 11.500 mm x 7.000 mm (2 floors each 3.500 mm height) The line is installed on 2 floors and needs to be operated by 2 persons. One infrared field and one steam supplied embossing roller for the Polyurethan coating Consisting of: I-Box, Brushing device, steamer, Hot-Box (steam heated) rectifier with beating roller, cooling field (ventilators), I-Box for secondary backing (up to 4.200 mm width) entry control, PU applicator (WTS), drying oven (infrared fields made by HEREOS) exit with edge trim, embossing roller (steam operated), accumulator winder with transport wagons, The main line components are made by CAMPEN. The control includes parts made by DANFOSS. The applicator and the mixing tanks for the PU-part are made by WTS. A suction unit is included. 1 pc. fringeing machine TITAN (Ref. No. 521989-N) like new, complete with table and motor
Please also see the following link:
|