1 pc. embroidery tufting machine (Ref. No. 8123945)
year of construction not known, 1 needle
1 pc. pass tufting machine G.T. (Ref. No. 6113678)
heavy duty pass machine, with 5000 mm wide table
modular kives and creel, motorised scray (J-Box)
2 banks of winders (Motocono 6 heads)
roll up motion, large set avery scales, large compressor
2 pcs. table tufting machines BROADSTREET type 30-30 (Ref. No. 6113551)
like new condition
high speed table tufting machine with one needle
can make carpets or pads on a turn screw mechanism
1 pc. table tufting machine VENOR (Ref. No. 6113372)
30 needles, loop pile, 3/16" gauge (?), with table
1 pc. tufting machine BROADSTREET Model 60 (Ref. No. 6123111)
84 needles
3 pcs. single needle table tufting machines BROADSTREET 30-30 (Ref. No. 6113114)
also suitable to make bathrobes and bedspreads
Two of the machines are in working condition and the third would only be used for parts.
60 to 100 cones of 100% cotton yarns in various colours can be included
1 pc. table tufting machine BROADSTREET Model 60 (Ref. No. 6112153)
500 mm working width, year of construction ?, 3/16", 105 needles, cut pile
1 pc. pass tufting machine GT Type Mark II (Ref. No. 6112686)
1/8" gauge straight needle bar machine
new knives, needles, loopers and reed modules all
fitted within the last 12 months
all table rollers re-covered
yarn feed rollers re-covered
for up to 5000 mm wide carpet
including 5000 mm wide J-Box with storage facility
included for up to 5 carpets
5.000 mm mending frame with gun track, lighting and electric switches
5.000 mm roll up machine with electric controls stop/forward/reverse
mending gun included
complete plant to produce, mend and roll carpet
plant covers a floor area of approx. 20ft x 20ft
also included:
3 head Moto Cono 10" cone winder with Air Splicer
1 pc. pass tufting machine GT Mark 2/3 (Ref. No. 6132658)
5000 mm table width, year of construction 1980, reconditioned in approx. 1999
1/8" staggered needle bar
cut pile, pile height 3-20 mm
1575 needles for 4.000 or 5.000 mm wide carpets
2 x KOPP variable speed gearboxes fitted to adjust both weight and/or feed speed
easily tufts up to 65 oz/sqyard
fully re set up with complete new needles, knives and loopers in the last 12 months (bills to prove available)
complete new bottom bearing change within last 12 months
yarn feed rollers re-wrapped
machine fitted with special reed module and pass dent
fully refurbished creel with new tubes
also J-Box with chain driven top roller
total working floor area including the creel is 15 ft x 19 ft
1 pc. complete bathroom carpet production plant (Ref. No. 8112447)
for large capacity, please ask for details
1 pc. pass tufting machine G.T. SUPPLIES MK 2 (Ref. No. 6111058)
with 5.000 mm wide table, staggered needles, PIVs
perfect order
1 pc. table tufting machine VENOR (Ref. No. 611595-N)
1 needle, cut-pile, good condition
incl. table and clutch motor
1 pc. table tufting machine TEN-TEX (Ref. No. 61187-N)
head only, cut-pile
1 pc. table tufting machine VENOR (Ref. No. 61186-N)
head only, 10 mm pile height, cut-pile
1 pc. table tufting machine VENOR (Ref. No. 13212)
1 needle, cut-pile, incl. table and motor
Second-Hand Tufting Machines
up to 3.900 mm working width
Second-Hand Tufting Machines
wider 4.000 mm working width
Second-Hand
Pass Tufting Machines | Table Tufting Machines
Top of Page
Second-Hand
Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski
home english
home deutsch