150 pcs. sectional warp beams (Ref. No. 4173990)
100 pcs. 21 inches x 21 inches, width 460 mm
50 pcs. 21 inches x 21 inches, width 480 mm
1 pc. warper HACOBA (Ref. No. 4173983)
4000 mm working width, year of construction 1979
barrell 3000 mm, used for PP tape
no creel behind, only warping head
still in running condition, used only as spare warping head before
1 pc. warping machine KARL MAYER DSN 50/30 P (Ref. No. 4173975)
including: Roller device WA 21
optical yarn control PROTECHNA
digital yarn counter CAMSCAN 2, type 5201
creel with 396 KFD brakes with gauge 9
(one bar has 9 places)
1 pc. beam warper BENNINGER ZDA 2000 (Ref. No. 4173927)
year of construction 1986
cone creel BENNINGER SCHOLZE for 832 cones of year 1986
warping creel and 12 beams made in 1986
12 beams spare made in 1987
Slasher SUCKER-MUELLER TZGWL made in 1985, with 5
1 pc. direct warper BENNINGER AG (Ref. No. 4173889)
1800 mm working width, year of construction 1973
roll diamter 800 mm
creel in V with 640 bobbins
bobbin's certical distance 250 mm
bobbin's horizontal distance 250 mm
1 pc. warping machine GEBR. MEYER BKH / 65 (Ref. No. 4173792)
1 pc. warping creel LANG TEX (Ref. No. 4173793)
for 90 cones
1 pc. warping machine BENNINGER ZDA/GCA (Ref. No. 4173608)
year of construction 1982
V creel for 720 cones, complete with 44 beams
1 pc. warping machine HANS AFFÜPPER TEXTILMASCHINENBAU GMBH type SMA 535 (Ref. No. 4173615)
year of construction 1991
Following defect of the machine are known:
Bars are out of tolerance
RPM-Counter is not functioning 100 %
Meter counter is not working
1 pc. beam warping machine KARL MAYER Type ZM-1 1800/1000 (Ref. No. 4173507)
year of construction 1996
with frame type GD-M 1400, frame capacity 1200 cones
double winder type AMR-12-ID 2700/100, 1.800 mm
working width, manufactured by ROTAL Italy
with 22 warp beams
2 pcs. warping machines SEGUI (Ref. No. 4172838)
year of construction 1997 + 1999 + 2000
1 Sectional Warping Machine model SW (year of construction 1999)
Equipped with beaming unit, leasing unit, warping unit
Equipped with variable speed DC motors at warping and beaming
Beam flange diameter: 1.000 mm
Safety system for beaming braking in case of off-time
Useful length 3.6 m
1 Creel COMSA for 832 cones system by trolleys.
This creel is model FKU and was constructed in 1997 and has two complete games of trolleys.
Classic spindles, tensioners, electronic stop motion devices
1 Sectional Warping Machine model SW (year of construction 2000)
Equipped wiht beaming unit, leasing unit, warping unit
Equipped with variable speed DC motors at warping and beaming
Beam flange diameter: 1.000 mm
Safety system for beaming braking in case of off-time
Useful length 3.6 m
1 Creel for 1.200 cones rotatory System. This creel was constructed in 2000
Classic spindles, tensioners, electronic stop motion devices
1 pc. warping machine with creel BENNINGER BEN-MATIC (Ref. No. 4172699)
2200 mm warping width, year of construction 1996
konus ratio 1:5
warping speed max. 800 m/min
with beaming machine
pressing unit 2.200 mm, max. 10 bar
with warping creel for Ben-Matic warping line
type GS/UB made in 1989
in very good condition
1 pc. warping machine HACOBA G 2-N (Ref. No. 4171964)
year of construction 1994/95
4 cone wagon creels totally 280 places
1 place dia 12 x 385, 7 floors
2597 mm creel height, 2700 mm field length
gauge horizontal 270 mm, vertical 270 mm
ball brakes for mono filaments
1 pc. warping line TEXTIMA (Ref. No. 4171105)
year of construction 1985
consisting of:
1 winder TEXTIMA 4142, 1 roller device
1 yarn reed, 1 compl. creel with 320 places
total dimensions: 10,5 x 3,2 x 2,8 m LxWxH
Top of Page
Second-Hand
Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski