1 pc. lab dyeing machine AHIBA (Ref. No. 5233919)
year of construction 1984

1 pc. HT lab dyeing machine MATHIS Labomat (Ref. No. 5233920)
year of construction 1990

1 pc. laboratory oven WTB-BINDER Type E 53 (Ref. No. 5233879)
220 V, 5,4 A
nominal temperature up to 230 C (adjustable)

1 pc. laboratory oven WTB-BINDER type identical to type E 53 (Ref. No. 5233880)
220 V / 5,4 A
nominal temperature up to 250 C (adjustable)

1 pc. laboratory oven (box) ACS Type T 2000 H (Ref. No. 5233881)
AMB > 100 C (temperature up to 120 C)
400 V / 11 A (8 kW)
was used for aging test only

1 pc. sample carding machine (Ref. No. 5233867)
foot print approx. 2000 x 8000 mm

1 pc. small lab carding machine (Ref. No. 5233740)

1  pc. laboratory needle loom HUNTER (Ref. No. 2153687)
12 inches working width, year of construction unfortunately not known
with one needle board
motor 440 V / 60 cycles, 3 phases
machine ready to work
one side cover is missing

1 pc. laboratory dyeing machine AHIBA Turbomat type TM6B (Ref. No. 5233685)
year of construction approx. 1994
with programmable control AHIBA 1000
incl. 6 dyeing tumbler open to the top with each 4 liters content and with 6 cartridges
good condition, low number of working hours

1 pc. Fourne longspin pilot line (Ref. No. 3232870)
year of construction approx. 1989
Extruder 40 mm, 28 L/D
for spinning different type of polymers (PP, PA, PES)
into BCF, FDY or POY
(For spinning PA or PES a polymer dryer is needed. This is not part of the line.)
6 induction heated godets, Barmag high speed winder
3D BCF texturizer
low speed SAHM winder
fully operational and good condition
The line has been designed as a pilot line.

1 pc. thickness measuring / control unit WEBER and SELFMADE (Ref. No. 5223622)
sensors are from manufacturer WEBER
mechanical parts and the software of management have
been developed by the Engineers of the factory

1 pc. test spinning unit for textile filaments (Ref. No. 5233577)
Single spinneret spinblock
POY, FDY spinning technology
Titer range 84 - 330 dtex
Throughput up to 240 kg/d
All godets 8000 m/min
Winder BARMAG CW 8, 8000 m/min
On-line control possible
Total weight: approx. 20 - 25 to

1 pc. discont. unit with disc ring reactor (pilot plant for test trials PET) (Ref. No. 5233565)
year of construction 1970
Batch size: up to 250 kg / batch
Capacity: up to 1400 kg /day
Melt viscosity 280 C: 0.1 up to 1000 Pa s
Max. melt temperature: 300 C
Process vacuum: < 0.5 mbar
Year of first operation: 1970
Applicatons: Several possibilities
Several reactors and additional equipment for operation under vacuum and temperature
Production of PET (pilot plant for test trials)
Scope of delivery: Paste preparation system (for raw material)
Melter (for raw material), 1st reactor with agitator for prereaction
2nd reactor - Disc ring reactor with agitator, Process column system
2 x spray loop system for vacuum applications, Under water pelletizing system

1 pc. DSC System (Controlling Unit) (Ref. No. 5233575)
for pilot plants

1 pc. Laboratory drawing unit DIENES (Ref. No. 5233574)
year of construction 1992
Take-up-speed < 300 m/min, 5 godets, 
3 heated (thermosetting < 250 C), 2 unheated

1 pc. 2-stage discont. unit batch size (pilot plant for test trials Polyamide) (Ref. No. 5233566)
year of construction 1982
up to 100 kg/batch
Capacity: 400 - 600 kg / day
Melt viscosity 260 C: 0.1 - 250 Pa s
Max. melt temperature: 290 C
Process pressure : up to 18 bar
Year of first operation: 1982
Operation availability: Last operation in 1998
Applications: Several possibilities
Several reactors and additional equipment for operation under pressure vacuum and temperature
Production of Polyamide (pilot plant for test trials)
Scope of delivery: 1st reactor with agitator, 2nd reactor with agitator
Condenser systems, Pelletizing system

1 pc. 2-stage discont. unit batch size (Depolymerization of Polyamide) (Ref. No. 5233567)
year of construction approx. 2000
2-stage discontinuos unit batch size up to 100 kg / batch
Capacity: 400 - 600 kg / day
Melt viscosity 260 C: 0.1 - 250 Pa s
Max. melt temperature: 290 C
Process pressure: up to 18 bar
Year of the first operation: 2000 ( including older parts)
Operation availability: Last operation in 2000
Applications: Depolymerization of polyamide
Scope of delivery: Small Extruder ES 20 (Hussmann)
Depoly-reactor, Process column, Several pumps
One collecting vessel

1 pc. spinning pilot plant (Ref. No. 5233571)
Rectangular spinning system
300 mm annealing system, monomer suction
Titer range 2 x 700 - 2 x 1600 dtex
Throughput up to 1700 kg/min
Additive dosing
SDW with 4 heated godets
Take-up-speed < 8000 m/min
On-line control possible

1 pc. Crystallization / Continuos Solid State Polycondensation (Ref. No. 5233568)
year of construction approx. 1987
Throughput: up to 70 kg / h
Capacity: 1400 - 1600 kg / day
Nitrogen purification:
Year of first operation: < 1987
Operation availability: Last operation 2002
Applications: Solid state polycondensation from PET or other polymers
Scope of delivery: Precrystallizer, 2-screw Crystallizer, Tower crystallizer
SSP reactor, Nitrogen purification, Several chips conveyor

1 pc. laboratory extruder (Ref. No. 3233520)
previously used for Polyethylen
20 mm - 10 kg
with motor, switch board etc.

1 pc. environmental chamber ESPEC Model EWPH (Ref. No. 5233500)
year of construction 1999, but never used
fully assebled and operational

3 pcs. testing machines (Ref. No. 5233062)
1.) ZELLZWEGER Uster Spectograph type SPG-26
2.) ZELLWEGER Uster Integrator type ITG L-110
3.) ZELLWEGER Uster Evenness Tester type GGP-B-29

1 pc. tension tester FRANK (Ref. No. 5231966)
table device, with PC etc.
Testing speed can be adjusted. Switch in lower position = fixed speed 100 mm/min. Switch in upper position = variabel speed according to adjusted speed. 1 step on the scale is equal to 1 mm/min.
Clamping length adjustment: 8 steps possible by adjustment ring. Following distances can be adjusted: 10, 25, 50, 100, 150, 180, 200 and 300 mm.
Power: max. 10 V in each of the two measuring areas.
Adjustable on adjustment potentiometer after removing the cover. Small allowed load resistance 0,5 MOhm.
Deformation 1 mV/mm traverse way
After removing the cover an adjustment potentiometer can be operated to correct the signals. The switcher allows to adjust the signals to ZERO on each pint of the traverse way.

1 pc. needle loom SCAPA (Ref. No. 2152834)
1400 mm working width, year of construction 1973
SINGLE BOARD DOWN STROKE MACHINE WITH COUNTER BALANCE
EXCELLENT WORKING ORDER

1 pc. ZELLWEGER USTER Spin Lab Micronaire Model 675 (Ref. No. 5232760)
year of construction 1995

1 pc. tufting machine CMC OMNI-GRAPH (Ref. No. 6122101)
24 " working width, year of construction 1995 - NEVER USED
special 1/10" gauge, 240 needles, cut pile
sample Omni-Graph tufting machine
equipped with two computer controlled sliding
needle bar attachments, yarn feed (front and rear)
CMC's Advanced cutting system II and complete
with 1/2 H.P. gear motor drive, as new, never used

1 pc. Tenometer (tension control) INSTITUT TEXTILE DE FRANCE (Ref. No. 5232422)
device for measuring tension forces of linen

1 pc. conditioning oven for cops HERGETH (Ref. No. 3222423)

1 pc. trial machine for twists and fancy yarns WELLER (Ref. No. 5232424)

1 pc. infrared Spectrophotometer PERKIN-ELMER Ltd. Model X98 (Ref. No. 5232425)
incl. instruction manual, suitable for tests of infrared spectroscopy

1 pc. laboratory dyeing machine (Ref. No. 5232426)
for sample dyes of approx. 1 kg, operated by steam

sundry laboratory tables and laboratory equipment (Ref. No. 5232427)

1 pc. sample carding machine J. HAIGH (Ref. No. 5232354)
12 " working width, year of construction ?
metallic card wire, fully checked over, cleaned and painted
fully guarded with new metal and perspex guards

Top of Page

Second-Hand Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:

deutsch  english  francais  espanol  nederlands
italiano  svenska  suomi  slovenski  cestina  hrvatski

home english     home deutsch