Second-Hand Tearing Machines and Textile Recycling Plants
| Edge Trim Openers | Pulling Machines | Tearing Lines | Shredders
1 pc. tearing machine AUTEFA (Ref. No. 1113982)
1500 mm working width, year of construction 1982
6 tambours, with material feeder
(not included are: cutting machine, filter unit, cleaning and bale press)
1 pc. tearing machine "NUOVE OFFICINE DI CHIAVAZZA"
(Italy) (Ref. No. 1113828)
1500 mm working width, year of construction 1995
suitable for cotton clips, polyester, acrylic etc.
6 drums, capacity approx. 100.000 kg per week
1 pc. rag tearing line DELL'ORCO (Ref. No. 1113769)
2000 mm working width, year of construction 1997
6 sections (cylinders),
consisting of:
one feed box feeding section 1&2 followed by a cleaner (material can
be diverted around the cleaner if desired) one feed box feeding sections
3,4,5&6 + another cleaner (material can be diverted around the cleaner
and fed directly into baler) one bale press (the press is automatic with
the exception of tying the wire. One Timtex filter with fan driven by 300
HP motor (capacity 75,000 cfm). Also included is one air lock assembly,
plus conveyors to service a dust baler. Two storage boxes in warehouse
storage, Two Dell'Orco 4 blade rotary cutters each providing 1000 cuts per
min. Also included are spare parts of which are 4 spare cylinders 3 spare
feed rolls, one spare condenser drum, one set of new flat sword pin lags
(still in the original case)+ 2 sets of mixed used & new lags. This
machine is on the floor of the plant and is operational and can be
inspected at any time.
1 pc. tearing machine DELL'ORCO (Ref. No. 1113770)
1500 mm working width, year of construction ?
consisting of :
a feed box feeding a pre-opening section followed by a cleaner, feed box#2
feeding sections 2,3,4,5,&6. An auto tie horizontal baler fed by a
shirley wheel condenser & fan plus spare cylinders & feed
rolls,fans,& etc. plus spare parts.
This machine is stored in a warehouse.
1 pc. small tearing machine ROLANDO (Ref. No. 1113637)
800 mm roller width, year of construction not known, machine reconditioned
entry table 600 mm, 1 cylinder
reconditioned, with new pins / clothing, new switch board
reconditioned motor
1 pc. small tearing machine SCHIRP (Ref. No. 1113613)
1000 mm working width, year of construction 1974
single tambour
1 pc. tearing line SCHIRP type 38 C II (Ref. No. 1113594)
1000 mm working width, year of construction 1977
4 tambours
including hopper feeder,
back feeding, material transport ventilator
suction ventilator
including various spare tambours (without pins)
Electric capacity 184 kW
good condition and maintained regularly
(A bale press and cutting machines are NOT available.)
The line is still in production at present.
1 pc. recycling line for waste material STARLINGER (Ref. No.
1113581)
year of construction 1994
suitable for reprocessing waste of PET, PA, PS or other polyolefines,
or mixed materials, e.g. PET-PP in one continuous operation.
The waste material - ground synthetic resin bottles, filaments (also
stretched or unstretched multifilaments), tapes, film, cloth etc. - is
directly fed to the unit and comes out as clean and dry granulate suitable
for re-utilization. Feeding is effected by a movement-controlled conveyor
with hot cutting device to the shredder cylinder in which the material is
cut into small pieces, automatically drawn in by the extruder screw,
plasticised and homogenized.
1 pc. cutting mill AMIS (Ref. No. 1113455)
300 mm working width, year of construction 1982
rotor diameter 300 mm, 2 knives
1 pc. tearing line TEMAFA / SCHIRP / TRÜTZSCHLER / AUTEFA / LTG
(Ref. No. 1113245)
year of construction 1969 / 1983 / 1992
specially designed for tearing filaments, yarn waste from cotton,
synthetics and similar
1 pc. rag tearing machine BEFAMA (Ref. No. 1113200)
without controls
1 pc. recycling line to recycle carpet waste PALLMAN (Ref. No.
1112871)
year of construction 1992, consisting of:
hacker, agglomerator, hot granulator, screw, intermediate tank, fine mill
(The recycling line is suitable to recycle coated carpet waste to produce
a granulate which will be used as an additive in the new carpet coating
process.)
1 pc. small tearing machine LAROCHE (no edge trim opener) (Ref. No. 1112749)
1 pc. recycling plant for baby diapers and similar LAROCHE (Ref.
No. 1112516)
year of construction ca. 1986, for use in combination with a diaper
production line
to regenerate the waste of diaper production,
energy consumption 80 KWh, air pressure 500 l/min
further details available on request
1 pc. 2-cylinder-tearing machine (Ref. No. 1111695)
600 mm working width, year of construction ?
cylinder diameter 1000 mm
ledges 60 mm wide = approx. 52 ledges on one tambour
each ledge with 9 pins in working direction and
60 pins in width direction of 60 mm. Total number of
pins per ledge = 540 x 52 ledges = 28.080 pins per cylinder.
Both tambours have same amount of pins
Tearing Machines and Textile Recycling Plants
Guillotine and Rotary
Cutters
Top of Page
Second-Hand
Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski