| Second-Hand
Dryers | Ovens | Drum Dryers | Floor Dryers | Thermobonding Machines
| Drying Machines | Sieve Drum Dryers | Drum Suction Dryers 1 pc. foil layer and pre heat unit HENNECKE (Ref. No. 7133951) year of construction 1997 to be used in front of a deep drawing machine previously used for Polystyrol, Polypropylene etc. CE-conform conveyor stroke 3150 mm conveyor moveable, heat resistant up to 250 C band speed 0,3 m/sec 48 infra red heaters 81,6 kW, 2000 x 150 mm soze vacuum gripper stroke 1000 mm foil layer height designed for 200 mm max. foil size previously used: 1800 x 1100 mm 1 pc. electric steam generator line BAY GmbH + Co KG (Ref. No. 7133955) year of construction 2001 low number of working hours, approx. 227 hours only up to now 1 pc. HT dryer KRANTZ (Ref. No. 7133922) year of construction 1984 with conveyor HF generator type HG 7/80K SIEMENS (oscillator) Entry 380/200 A, 3 N, 50 cycles Exit HF capacity 80 kW, DIN 48600 working frequence approx. 14500 KHz conveyor 800 mm max. belt speed 0,6 m/min 1 pc. steam generator GLAYTON (Ref. No. 7133904) year of construction 2001 1 pcs. infra red fields (Ref. No. 7133876) 2 units for 4000 mm and 2 units for width above 4000 mm to 5200 mm especially for gel foams 1 pc. hgih speed steam generator ZAFA (Ref. No. 7133772) heating coil exchanged in 1996 1 pc. drying uni for bobbins and dyecones GALVANIN (Ref. No. 7133914) year of construction 1996 1 pc. sieve drum dryer FLEISSNER (Ref. No. 7133720) 2600 mm working width, year of construction 1992 1 drum, approx. 1400 mm diameter suitable for high temperature (up to 310 C) 1 pc. steam heated can dryer (Ref. No. 7133708) 1 pc. Infrared gelling unit INFRAGAS (Ref. No. 7133454) year of construction 2000 with automatic control of the product's temperature 1 pc. exhaust air cleaning station KOENIG (Ref. No. 7133456) year of construction 1999 suitable for cleaning of hot air as common on stenter frames, coating lines and similar machines 1 pc. drum drying oven (thermobonding) SANTALUCIA UNITECH (Ref. No. 7133444) 4200 mm working width, year of construction like new, has been used 10 months only suitable to dry lightweight textiles allowing many passages on the cylinders. The cylinders, with a working width of 4200 mm, are pierced and put in depression. The chamber has been made with a considerable volume (with two different burners) to obtain the best drying homogeneity. The speed of cylinders can be changed to modify the final aspect of the product. The feeding is both over and underneath, controlled by a tension device (collecting or release). The combination of temperature & tension values, on the two cylinders, allow a further final finishing. 1 pc. tumbler QUADRO COMANDO Type B P R 150 (Ref. No. 7133424) year of construction unfortunately not known, generally reconditioned drum size 2000 mm diameter x 1200 mm depth heated by gas burners (gas pipe 1/2") V 380, IP 54, Hz 50, V aus 24, CEI 17/13 Space requirement 5.500 x 5.500 mm Low number of working hours (approx. 150 hours only) 1 pc. dryer STENTEX Type Stentotherm 3300 (Ref. No. 7133394) 2000 mm working width, year of construction 1999 speed 1 - 15 m/min field length 4.000 mm zones on entry and exit of the thermo zones: each 620 mm semi-direct natural gas heating capacity approx. 310 kg/h on entry humidity 70 %, exit humidity 8 % temperature 160 C, fibers: cotton production speed 10 m/min 1 pc. dryer FLEISSNER (Ref. No. 7133246) 1800 mm working width, year of construction approx. 1980, reconditioned suitable for drying fiber flock and endless material low number of working hours The machine has been used approx. 1 or 2 years only in a laboratory for trials. Working width 1800 mm, presently limited to 1400 mm by covers Drum with fine sieve cloth 4 sieve drums of each 4 sqm drying area, drums driven by cardan shaft 2 Gas burner, control of heating capacity according to temperature adjustment, each 600 kW heating capacity Entry by feeding rollers New controllable central drive, new wires, new SIEMENS SPS hard- and software Touch Screen Display, new electric diagrammes 2 new burners with above mentioned heating capacity 1 pc. preheat oven for headliner production SCHOTT + MEISSNER (Ref. No. 7133204) year of construction 1998 blanket dimensions 1200 - 1700 mm working width x 3000 mm length 150 kW natural gas fired burner MAXON plus 12 kW heat exchange at conveyor 15 kW air circulation blower max. approx. temperature 250 C transfer shuttle extends 3100 mm into press area Requires 200 mm plus blanket thickness x 1940 mm daylight 1290 mm from floor 1 pc. second-hand exhaust air cleaning station RNV (Ref. No. 8302773) regenerative afterburning, volume flow approx. 12.000 Nm³/h 2 reactors with gas burner (approx. 5 Nm³/h), ceramic heat exchanger bed oxidizes harmful hydrocarbons from exhaust air at minimal energy demand (Formaldehyde, aerosole etc.) in H20 and CO2 1 pc. cylinder dryer GOLLER (Ref. No. 7132756) 1800 mm working width, year of construction 1976 6 rollers (3 rollers are teflonized) 600 mm roller diameter, steam heated 1 pc. drying machine ALEA (Ref. No. 7132532) year of construction 1983 3 fields each 2.200 mm - each field can be heated separately capacity approx. 8.500 to 10.000 kgs in 24 hours, 36 KW cooling field = 1 field 2.200 mm conditioning field = 1 field with 3.300 mm water consumption ca. 20 l/h, 8 kw The dryer can be heated by steam or electrically. Steam requirement ca. 600 kg/h incl. feeding wagons and boxes 1 pc. chimney made from stainless steel (Ref. No. 8302386) 100 mm diameter approx., approx. 12 meters height 1 pc. regenerative air burning installation (Ref. No. 8302176) 1 pc. fixing dryer BREITENBACH (Ref. No. 7132125) 800 mm working width, year of construction 1999 gas heated thermo fixing dryer with 70 m band content infinitely variable band transport, controlled by 2 dancers stainless steel construction gas heated, max. temperature 200 C with exit device 1 pc. sieve drum dryer FLEISSNER (Ref. No. 7131061) 1200 mm working width with 6 drums, diameter 1.600 mm entry conveyor and 2-roller-press made by FLEISSNER incl. switch board, heated by steam 1 pc. sieve drum dryer IMAC (Ref. No. 7131062) 1200 mm working width similar to FLEISSNER machines, with 6 drums, press, entry conveyor, switch board
Top of Page |