4 pcs. scattering machines VILLARS (Ref. No. 7144006)
4000 mm working width, year of construction ?

1 pc. screen machine STORK (Ref. No. 7143998)
4000 mm working width, year of construction ?

1 pc. knife over all coater (to be completed) JWS (Ref. No. 7143999)
4000 mm working width, year of construction ?

1 pc. air knife coater (Ref. No. 7144000)
4000 mm working width, year of construction ?

1 pc. floor covering homogeneous line (Ref. No. 7143996)
2000 mm working width, year of construction ?
2 m floor covering homogeneous line non directional
products 3 Millions Sqm/year

1 pc. Hotmelt Lamination Machine MONTI (Ref. No. 7143960)
year of construction 2000
suitable for a wide range of products such like microfibre
and similar knitted fabric
Previously used to laminate microfibers with some canvas.

1  pc. flocking line for door mats SCHENK (Ref. No. 7143956)
year of construction end of 80s
has been used in production for approx. 3 to 4 years only
previously used to flock design on door mats of
size: 500 x 700 mm, 600 x 900 mm or two pieces of 400 x 600 mm
suitable for electro static multi colour flocking

1 pc. foam mixer HANSA Industrie-Mixer Type Vario-Mix (Ref. No. 7143870)
year of construction 2001
(without pump station and cleaning)
weight of mixer approx. 1000 kg
product: latex, chalk, flame retardants, thickener, water
capacity total 1500-3000 kg/h

1 pc. lamination line KNOBEL (Ref. No. 7143842)
2300 mm working width, with powder scatterer

1 pc. laminator / powder coating line (Ref. No. 7143832), 72 inches width

1 pc. foam applicator ZIMMER Variopress VP-BS-51 (Ref. No. 7143721)
3200 mm working width, year of construction 1989

1 pc. impregnator (Ref. No. 7143704)
2800 mm working width, year of construction 2003
with new rolls

1 pc. wide spraying nozzle (Ref. No. 7143705)
1800 mm working width, year of construction 2004

1 pc. foam applicator (Ref. No. 7143657)
2400 mm roller width, year of construction 1987

1 pc. coating line TEXICON AUTOFOAM C 756 (Ref. No. 714262)
2500 mm working width, year of construction 1987
low number of working hours
with foam mixer, construction year 1987
autofoam finishing system suitable for 2.500 mm wide needle felt carpets and similar
consisting of:
- 1 Autofoam applicator system
suitable for applying foamed Latex Binder to needlefelt carpets.
- 1 Foam Generator Unit
- 1 Automatic foam control panel

1 pc. impregnation machine for latex impregnation AMDES / FLEISSNER (Ref. No. 7142562)
2200 mm working width, year of construction 1975
suitable for needle punch nonwovens
with dryer

1 pc. foam applicator MITTER type MIFA (Ref. No. 7143409)
2500 mm working width, year of construction 1997/98

1 pc. flame lamination line SCHMITT (Ref. No. 7143076)
2000 mm lamination width, year of construction ?
electrical controlled material infeed including cutting unit on exit and hydraulic winder
still in production

1 pc. combined laminating calender SALADIN 2400 (Ref. No. 7112152)
2400 mm calender width year of construction REFURBISHED
calender diameter 500 mm
1 pressure roller water cooled plus two cooling rollers
1 teflonized oil heating roller up to 250 C
1 pneumatically adjustable press-on rubber belt
(both heating roller and rubber belt allow working as a
continual iron press with a constant temperature,
avoiding the use of a sintering oven, even for heat
sensitive products.)
without electrical installation
refurbished as new

1 pc. powder lamination machine VILLARS (Ref. No. 7142971)
1800 mm roller width, year of construction approx. 1992/93
1.600 mm material width
with powder scatterer and 3.000 mm infrared heating field
with calander
with double band cooling press
with line control (turning frame)
with 4.000 mm accumulator
with batching unit type winder
with cross cutter
with edge trimmer left and right side
with roll take-off
with 2 large accumulators on entry
with 2 unwinders on entry
with cooling device and water tank

1 pc. hotmelt coating line NORDSON CT 4036 S (Ref. No. 7142815)
380 mm application width, year of construction 1995
application width max. 380 mm
application speed max. 300 m/min
max. speed 400 m/min
application weight max. 5 grams/sqm
with Meltex melt-glue applicator, tank device
applicator head
2 unwinder up to 1000 mm diameter
1 re-winder up to 1200 mm diameter
good condition, ready to work
(suitable for example for hygiene and shoe industry)

1 pc. flat bed dry lamination machine SCHAETTI / KANNEGIESSER TLM 1830/1 (Ref. No. 7142920)
1830 mm working width, year of construction 2005, the machine has worked
3 months on test stand only, 3 x 400 V, 50 cycles
control voltage 230 V AC, 24 V DC
total electrical power 127,3 KW
mechanical speed drive 2-30 m/min
setting range heating = 0 - 240 C
quantity of heat = 118,8 kW
number of heat profiles = 15
number of heat cartriges = 36
length of heating zones = 1600 mm
belt width = 1880 mm
upper belt length 6400 mm
lower belt length 6700 mm
flexo pressure system
driving motor 2,2 kW

1 pc. carpet back coating line ARTOS (Ref. No. 7142915)
5200 mm working width, year of construction 1969
consisting of: roll unwinder, pile turner, J-Box, steamer, foulard
Pflatsch device, stenter pre dryer (4fields), foam rakel
infra red field, coagulate channel (2 fields), ARTOS embossing device
stenter frame vulcanization channel (9 fields)
cooling shouwer (3 zones), accumulator, edge trimmer / cutting device
winder (2 rollers)

1 pc. production line for cleaning sponges BDM Italy type FAR2001 (Ref. No. 5142099)
1800 mm working width
Principle of production:
- 3 coats of foam plastic glued with fibres are passed into the machine from for instance 3 rolls or perhaps as sheets. Max. material width 1800 mm
- The 3 coats are cut horizontally in strips of for instance 70 mm width
- The 3 coats are cut across, producing for instance 3 x 25 sponges
- On the belt conveyor from Pos. 3 to 5 the sponges are set on end changing the base from 7 x 9 cm to about 3 x 9 cm
- The packing machine counts up the sponges (for instance 10 pcs.) and wrap the sponges in foil, in the same way as wrapping cigarette packages in foil.
It is possible to put on a self-adhesive label at the same time.
- The package with 10 pcs. Sponges is lead to Pos. 7 by the belt conveyor.
- Cardboard raiser machine/packing machine
This machine automatically forms a cardboard where you can put 50 x 10 pcs. Packages. The cardboard is automatically sealed.
- Finished cardboard
All operations are done by one person only who produces 800-1000 x 10 pcs. Packages per hour in
the sponge size 7 x 9 x 3 cm per spong.
- Placement of the person who operates the production process.
The machine can work with preprinted foils and is also able to put on labels.

1 pc. mixing head for latex and similar (Ref. No. 7142737)
suitable to get latex foam by air and latex, made from stainless steel with SKF bearings
connection 1", suitable for foam weight 300-800 g/l, delivery approx. 20 kg, 1 minute at 600 g/l
mixing cylinder, diameter 200 mm, length 390 mm

1 pc. PU coating line CAMPEN (Ref. No. 7142648)
year of construction 1987
TDI spraying device made by WTS (Weidmann)
Space demand: 32.000 mm x 11.500 mm x 7.000 mm (2 floors each 3.500 mm height)
The line is installed on 2 floors and needs to be operated by 2 persons.
One infrared field and one steam supplied embossing roller for the Polyurethan coating
Consisting of: I-Box, Brushing device, steamer, Hot-Box (steam heated)
rectifier with beating roller, cooling field (ventilators),
I-Box for secondary backing (up to 4.200 mm width)
entry control, PU applicator (WTS), drying oven (infrared fields made by HEREOS)
exit with edge trim, embossing roller (steam operated), accumulator
winder with transport wagons,
The main line components are made by CAMPEN.
The control includes parts made by DANFOSS.
The applicator and the mixing tanks for the PU-part are made by WTS.
A suction unit is included.

1 pc. dip coating line BRÜCKNER (Ref. No. 7142497)
consisting of:
1 unwinder-rewinder unit with 120 m and 90 m accumulator
Hotflue dryer with 6 x 6 m content, circulating air, exhaust air, gas heated, 4 gas burners
moveable foulard made by GOLLER (electrical movement back and forth)
steel frame for dryer and paste preparation station
all technical documents are available

1 pc. foam mixer CAMPEN C1CR1000G2 (Ref. No. 7142154)
generally reconditioned, good condition
height: 2.050 mm
length: 2.200 mm
width: 1.300 mm
weight: 900 kg
connection of cooling water 1/2"
connection of compund 2" - 3"
connection of air pressure 3/8"
exit of mixing head 2"

1 pc. flat bed laminating machine MEYER (Ref. No. 7141047)
2000 mm working width, year of construction approx. 1980
suitable for roll goods and sheets

Top of Page

Second-Hand Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:

deutsch  english  francais  espanol  nederlands
italiano  svenska  suomi  slovenski  cestina  hrvatski

home english     home deutsch