1 pc. foulard KUSTERS (Ref. No. 7114007)
1 pc. smoothing calander (Ref. No. 7113891)
2700 mm working width, year of construction 1988
4 pcs. calanders OLIVA-ARTES (Ref. No. 7113911)
year of construction 1982
1 pc. foulard KUESTERS (Ref. No. 7113892)
2700 or 2800 mm working width, year of construction ?
1 pc. calander KÜSTERS type 212.50-1800 (Ref. No. 7113841)
2000 mm roller width, year of construction 1986, line force 280 N/mm
new heat exchangers of hydraulic and lubrication from year 2006
power supply 3*80A, metal detector, close winder is included
preventive maintenance done two times a year
Heat Exchanger: primary thermo oil or electric
type VTE HTT Energy Systems GmbH from 1986
75 kW, power supply 83 kW (3x125A)
max. temperature 300 C
1 pc. calander WEISS type PTM-E (Ref. No. 7113819)
1400 mm working width, year of construction 1992
1,4 kW total power, 4 bar steam, air pressure 4-6 bar
1 pc. pressing unit for impregnation MENZEL (Ref. No. 7113812)
3000 mm working width
1 pc. hot oil calander (Ref. No. 7112808)
20 foot, year of construction approx. 1985
2 rolls with electric boiler
"CHROMOLOX" heating the oil up to 600 degrees
Rolls and bearings are standard hollow with hot oil circulation.
1 pc. 4-roll calander and 2 gaps with KUESTERS (Ref. No. 7113620)
4400 mm working width, year of construction ?
2 S-Rolls 170, 2 engraved rolls
3 complete mechanical transmission with 5 motors gears
2 engraved rollers heating with motorization and pumps and transfer pipes
1 skid S-Roll heating with 1 motor and pump and 2 filters and transfer pipe
1 complete hydraulic station with hydraulic pipes
many spare parts included
1 pc. horizontal foulard BIANCO (Ref. No. 7113603)
4300 mm working width, year of construction ?
with cooled cylinders width 4300 mm and a cleaning blade to eliminate the useless foam (no more foam, only suspension with emulsion breakage). The foam control is obtained through the balance of the temperature and the humidity control (the latex dry on the cylinders). The foulard is contained into an apposite chamber, with equalized temperature and humidity through a forced air conditioning system; the control of the foam's physical characteristics is so always ensured.
1 pc. calander BF PERKINS (Ref. No. 7113596)
4572 mm total cylinder width, working temperature 150 C
electric / oil heated
The oil is heated by 2 pcs. 90 kW electric heaters.
1 pc. impregnation machine (resin impregnator / saturator) BOMBI (Ref. No. 7113284)
3600 mm working width, year of construction 1998/1999 - as new condition
142" inches working width
low number of working hours - The machine has been used for samples only and as a conveyor during regular
production.
1 pc. embossing machine ETS REPIQUET (Ref. No. 7113149)
1650 mm working width, year of construction ?
with heater and light control
1 pc. embossing machine ETS Repiquet (Ref. No. 7113150)
1300 mm working width, year of construction ?
with printing device, 1 colour
1 pc. thermobonding calander for nonwovens KÜSTERS type 413.50 (Ref. No. 7112980)
3800 mm working width, year of construction 1995
3-bowls-thermobond calander
including 2 cooling rolls + frame
including 1 pressure / heating unit for one Hot-S-Roll 170
(heating with thermal oil from primary circuit)
drive and electrical control for 1 steel roll and one S-roll type Hot S-Roll 170
spare parts (speed controllers, mechanical parts etc.),
but without steel rolls, Hot-S-Roll and heating unit for steel roll
1 pc. calander RAMISCH-KLEINEWEFERS (Ref. No. 7112777)
2400 mm working width, year of construction 1988
(2500 mm smooth/smooth)
with heating station
working speed up to 100 m/min
2 steel rollers with diameter 460 mm
the upper installed on calander stationary, smooth surface
lower roller can be exchanged
a) smooth surface roll - 100 % bind
b) engraved roll NW5 Casaretto, pattern 0,5 x 0,5 mm square
distance between center 1,35 mm, height 0,3 + 0,3 mm, 13,72 % area bind, 54,9 points/sqm
c) engraved roll NW22 Casaretto, pattern 0,9 x 0,9 mm square,
distance between center 1,65 mm, height 0,2 + 0,3 mm, 29,75 % area bind, 36,7 points/sqm
1 pc. foulard BOMBI (Ref. No. 7112707)
5000 mm working width, year of construction 2001 - NEVER USED
with rakel and two rollers, inclusive control
Optional: 1 pc. mixer made by BOMBI, also never used
The machine is never used and therefore in "as new" condition
1 pc. combined laminating calender SALADIN 2400 (Ref. No. 7112152)
2400 mm calender width year of construction REFURBISHED
calender diameter 500 mm
1 pressure roller water cooled plus two cooling rollers
1 teflonized oil heating roller up to 250 C
1 pneumatically adjustable press-on rubber belt
(both heating roller and rubber belt allow working as a
continual iron press with a constant temperature,
avoiding the use of a sintering oven, even for heat sensitive products.)
without electrical installation, refurbished as new
1 pc. embosser PERINI (Ref. No. 7111213)
2100 mm working width, year of construction approx. 1986
rubber/steel, up to 400 m/min
1 pc. calander RAMISCH KLEINEWEFERS (Ref. No. 7111449)
2400 mm working width, year of construction 1987
max. temperature 300 C, max. speed 80 m/min
Top of Page
Second-Hand
Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski