1 pc. cotton bud machine FALU CT 200 (Ref. No. 2303542) with cube box packing machine (56 pcs.) for children ear buds

1 pc. cotton ear bud machine FALU CT 200 (Ref. No. 2303543) with carton box packing maschine SV 2 (200 pcs.), for PP buds

1 pc. cotton ear bud machine FALU CT 200 (Ref. No. 2303544) with carton box packing machine (200 pcs.) for buds with paper shaft

1 pc. cross lapper AUTEFA (Ref. No. 2143618)
1 pc. carding machine HARTMANN (Ref. No. 2133617)
1 pc. coaster machine KIES + GERLACH (Ref. No. 2301791),  for doilies, catering trade articles 
1 pc. coaster machine NILPETER VD 25 (=) (Ref. No. 2301793)

1 pc. extrusion line (Ref. No. 3233209) 2 extrusion lines WINDMOLLER, blow type, 90 D
1 confection line WINDMOLLER able to produce valve bags and block bottom bags in LDPE, LLDPE and Methalocene

1 pc. tufting machine PICKERING (Ref. No. 6131656), cut pile 1/10" gauge left hand Pickering tufting machine  for automotive application,  with 1740 needles (145 modules)

1 pc. Nonwoven Line for production of Insulation Materials (Ref. No. 2123211)
Bale Opener, Opener, Single doffer carding machine, Spraying Chamber, Infrared Dryer, Camelback lapper, Longit. Cutting Machine

1 pc. carding willow (Ref. No. 1123293) previously used to tear nonwoven material
1 pc. drum tacker / cylinder pre needle loom ASSELIN type 169 (Ref. No. 2173434)
1 pc. weaving loom VAN DE WIELE SLC83-430/CRT82  Jacquard: PTX 6720+4480
1 pc. weaving machine VAN DE WIELE CRT-430 Jacquard: PTX 6720+4480
1 pc. weaving machine VAN DE WIELE SLC83-430/CRT82 Jacquard: PTX 6720+4480

1 pc. nonwoven line specially designed for recycled fibers (Ref. No. 2122377),  3 pcs. bale openers WISE for blending,  3 pcs. hopper feeders WISE,  3 pcs. HUNTER carding machines, 
double doffer machines,  1 pc. cross lapper WISE,  eventually incl. 1 pc. needle loom 2.500 mm working width, with infeed belt, - 1 pc. filter unit WISE, - 1 pc. spraying chamber for double sided spraying, (suction) incl. filter unit and recovery unit for bonding agent, 1 pc. oven GEORGE KOCH + SONS, gas-heated, 1 belt, 5 chambers, with sprinkler and water spray fire-extinguishing installation
for thermoplastic bonding agents, with cooling zone, 2 belts (bottom and top),  accumulator,  longit. and cross cutting unit with meter counter and delivery of ready sheets to lifting table,  edge trim openers WISE,  manual pressing station for recycled fibers incl. sealing station for Polyethylene foil,  air cleaning unit with water cooling and filter (for the air from the oven etc.)

1 pc. needle punch machine DILO / ETF / SCHIRP OD-I S 45 (Ref. No. 2113533)
1 pc. needle loom DILO DI-LOOM OD-I S 45 reinforced model for heavy material
7496 kgs of card wire (never used)  GRAF + HOLLINGSWORTH (Ref. No. 9013031)

1 pc. Airlay carding line for natural fibers DOA / FEHRER (Ref. No. 2133355)
suitable for production of natural fiber / polypropylene materials for automotive industry and similar
Square meter range without fleece: 900 g/qm to 1900 g/qm
New FEHRER K 12 device installed in 1998.

1 pc. cross lapper ASSELIN type ELITE (Ref. No. 2143229)
1 pc. swivel arm cutting press SANDT ST 120 (Ref. No. 5202419)
100 pcs. winding heads HIRSCHBURGER (Ref. No. 3191348)
1 pc. winder SAHM 260 (Ref. No. 3192438)
1 pc. longit. and cross sewing machine AKAB (Ref. No. 5213423)
1 pc. calander IDDON (Ref. No. 7113518), cooling roller section after the calender

1  pc. rapier weaving factory SAURER / VAMATEX / SUZUKI / HACOBA / BENNINGER / ZELL / STÄUBLI / KARL MAYER (Ref. No. 8112851)

2 pcs. gas heater stations ATELIER D'ARGENTAN Cobra series (Ref. No. 7133524)
1 pc. inspection unit (Ref. No. 5171060) including roll up and repair gun for tufted carpets
1 pc. machine SUCKER MULLER HACOBA Sensocom 1000 USK-S/SM (Ref. No. 4173523)
1 pc. twisting machine SAURER ALLMA ALLMAT 240/600 (Ref. No. 3173129)
1 pc. tension tester ZWICK type Z010 (Ref. No. 5223390)
3 pcs. winding machines GILBOS GF 10 R (Ref. No. 3192123)
1 pc. winding machine GILBOS GF 10 R (Ref. No. 3192143) for cylindrical cones
1 pc. pipe metal detector JOSSI (Ref. No. 1133451)
1 pc. stenter frame BRÜCKNER HN 28/3 (Ref. No. 7122961),  foulard KÜSTERS
14 pcs. cut and fold maschines HORST KIND and FORTHMANN (Ref. No. 8303497)
1 pc. cross winding machine SAHM 260 E (Ref. No. 3193502)
1 pc. automatic closing machine SCHMALE Durate 350 (Ref. No. 8303446) for closing side seams
1 pc. tufting machine SINGER-COBBLE (Ref. No. 6133006) 1/10" cut pile COC, with creel

1 pc. finishing line for pillowcases, sheets etc. ARBTER BELA 12 (Ref. No. 5143107)
cross cutting from stack, possibilities for pillow cases, sheets, duvet covers
cross seaming, longit. cutting

1 pc. dynamometer / tension tester INSTRON 24411 (Ref. No. 5223452)
suitable to test elongation, tearing resistance etc.

1 pc. Non-Wovens Finishing Line (Ref. No. 7143237)
Flexible finishing system for needle punched, foaming and full bath impregnation
The system carries out the finishing and the diversification of the TNT base product.
The unit is consisting of:1. Roll Feeding section, 2. Impregnation and coating foulard
3. Foaming machine, 4. Infragas gel group, 5. Drying oven S. Lucia, 6. Cooling system
7. Accumulator and roll up at the exit

1 lot of band weaving looms (Ref. No. 4123326)
1 pc. calibrateable doubling-, measuring- and winding machine MENSCHNER (Ref. No. 5113328)
1 pc. inspection machine for carpets (Ref. No. 5173438)

1 pc. two-roller-calander EDUARD KUESTERS (Ref. No. 7112888)
with floating bottom roller, roller surface: smooth steel surface, production width 2.800 mm

1 pc. velour needle punch machine DILO DI-LOUR II/25 (Ref. No. 2213515)
1 unwinder with DOHLE machine, edge trimmer, re-winder

1 pc. spinning plant (Ref. No. 3232722), - 2 pcs. extruders ESL for multi spinning PP yarn with SAHM winders, - 26 pcs. texturising machines type "TECHNOSERVICE" from USA

1 pc. needle punch nonwoven line (Ref. No. 2113233), formerly used for fine fibers and high length micro fibers, Thermosetting and Calander system, with 3 needle looms DILO

1 pc. coating line for glue STORK CT IV / 1700 (Ref. No. 7143236)
together with Mixer / Foam made by STORK type FP II S/C/L

1 pc. calander KÜSTERS (Ref. No. 7113357)
1 pc. thermo fixing machine with calander  THERMOPLAST 945 SP (Ref. No. 7113368)
5 pcs. circular knitting machines KRENZLER (Ref. No. 8133550) for space dyeing
10 pcs. weaving machines DORNIER 280 + 180 + 240 GTVO/S (Ref. No. 4123464)
1 pc. weaving machine SULZER PU 73ES S 150 E10 D1 F (Ref. No. 4113465)
1 pc. conus band warping machine BENNINGER SUPERTRONIC (Ref. No. 4173466)
1 pc. warping frame SUCKER MÜLLER Type WNS (Ref. No. 4173467)

1 pc. complete staple fiber production line (compact spinning line) BARMAG (Ref. No. 3233180)
The line starts at the dosage unit and includes godets, cutter, crimper, oven etc.

1 pc. Rando Webber Fibre Processing Plant RANDO (Ref. No. 2223439)
including: fine opener, fan, condensor, 84" rando level feed with rando webber
set of cutting rolls, table off / folding table, roll winder, large opener, twin blade rotary cutter

1 pc. tufting machine COBBLE ST 88 US PANTERA (Ref. No. 6131890)

3 pcs. weaving machines DORNIER HTV 8/6 (AT-Control) + HTV 8/SD (Ref. No. 4123487)
with STAEUBLI dobby 2667 + 2237 (punched cards), weft feeder 2 ROJ IMP 

1 pc. coating line with doctor blade ISOTEX (Ref. No. 7142929)
1 pc. single needle automatic quilter HAUSER SNA 3000 S (Ref. No. 5153440)
1 pc. airlay carding machine RANDO (Ref. No. 2223158)
1 pc. nonwoven carding machine H.D.B. BBR-2 (Ref. No. 2133395)
1 pc. thermobond machine KANNEGIESSER Multistar Plus VK 1400-P (Ref. No. 2323399)
1 pc. Non-Woven carding Set BEFAMA (Ref. No. 2133203), chute feed
1 pc. hopper feeder HERGETH RS 2500 (Ref. No. 1143290)
1 pc. quilting machine SOTEXI L2000 (Ref. No. 5152974)  control KITTRONIC and  Editor EMOTIF 4.1.
1 pc. needle loom HUNTER Fiber Locker type M 6010 (Ref. No. 2151434)
1 pc. rack for palettes (Ref. No. 5192040)
2  pcs. heatset machines SUESSEN GKK 6R (Ref. No. 3303178)
l
10 pcs. band weaving machines MÜLLER NF 42 (Ref. No. 4123513)
suitable for elastic and non elastic bands

1 pc. shearing machine M TEC  SFS 1/2.4 ( No. 5243161), with digital control type PCS095 Topline

1 pc. compact spinning line with one position BARMAG (Ref. No. 3232869)
spinning plates with 8000 and 30500 holes for production of coarse staple fibers (6.7 - 15 dtex) and nonwoven applications (1.1-3.3 dtex)

1 pc. stitchbonding machine MALIMO MALIWATT 14013 (Ref. No. 516270-N), gauge 14
1 pc. pyrolysis oven for cleaning jets of extrusion  SWISS CAB type JCP 3672 (Ref. No. 3233314)

1 pc. double plush weaving plant (Ref. No. 8112831)
2 Guesken Gmv 82 looms each with 2 Jeos Grosse Jacquard machines; 1344 HOOKS used
1 with Brock dobby and 1 with Kaiser dobby, Both looms with good metal creels.
producing double pluesch fabric for the transport sector, 3 PG 180 Guenne double velvet looms with Staubli dobbys, Working (2) for tansport seating fabric, (1) For luxury Mohair furniture market
I Mertens + Frohwein wireloom rapier with Grosse Jacquard and Kaiser Dobby + Metal Creels
4 Somet DEWAELLE hybrid wirelooms, rapier, each with 2 BONAS Jacquards + Metal Creels
1 HACOBA/CEZOMA 12 SPINDLES BOBBIN WINDER, 1 Schlafhorst DSB WARP WINDER

1 pc. tufting machine COBBLE ST 77 (Ref. No. 6133063) 1/10" gauge loop pile, pile height 3-6 mm
1 pc. structuring needle loom DILO DI-LOOP SV 25 (Ref. No. 2212761)

1 pc. crocheting line, consisting of: (Ref. No. 811129-N), 1 pc. high speed crocheting machine BOEGLI type BVH-M, 1 pc. circular crocheting machine BOEGLI type BRH, 1 pc. finishing and drying machine MAGEBA type 1

1 pc. heat transfer printing machine ACROMATIC (England) (Ref. No. 7172541)
 shoe type with no blanket, can be used for laminating, fusing, finishing or printing
incl. pre heater for the material and a cooling system on the finishing side.
I
1 pc. rotary template printing machine PETER ZIMMER (Ref. No. 7173422)
entry, brushing device, suction device, expander, thermo plast heating drum
rotary template printing machine made in 1979, suitable for woven material as well as for warp knitted cloth, infra red heater, glueing device for wet glue, Printing cloth welded, type HABASIT 

1 pc. drawing frame SCHLUMBERGER GC 13 (Ref. No. 3143473)
1 pc. cotton bud machine FALU (Ref. No. 2303332)
4 pcs. carding machines TRUTZSCHLER DK 715 (Ref. No. 2133132)
8 pcs. inspection machines GMÖHLING/MENGEN P 11 (Ref. No. 5171104)
1 pc. warping machine HACOBA BUB 800 (Ref. No. 4172608)

1 pc. carding machine THIBEAU CA 11R3P5PPLL (Ref. No. 2133213)
together with cross lapper ASSELIN-THIBEAU PROFILE P435

4 pcs. label looms SULZER-RÜTI Type G6100 (Ref. No. 4113499)
with Jacquard BONAS + STÄUBLI, mit Label System VAUPEL as well as MEI

1 pc. band weaving machine JACOB MUELLER NFN53 (Ref. No. 4123457)
7 pcs. electronic jacquard machines BONAS 6 x IBJ II + 1 x BLJ (Ref. No. 4133486)

1 pc. needle loom DILO RONTEX 50 (Ref. No. 2192950) including tools for various inner tube diameters

1 pc. textile waste recycling plant (Ref. No. 1112376), consisting of:
- infeed conveyor for textile waste with metal detector SAFELING Selforf Great Britain
- cutting machine LAROCHE / - guillotine cutter PIERRET
- tearing machine LAROCHE Super-Europe, 4 tambours

1 pc. cutting machine LECTRA VT-2500 V2 (Ref. No. 5143517)
with PHILIPS spreader, PHILIPS Cloth Hoist, Flatbed Measuring inspection machine
PHILIPS 9.6m Ait Floating table Cad System, textile cutting machine

1 pc. needle loom FEHRER NL 28 (Ref. No. 2161902)
1 pc. swivel arm cutting press SANDT (Ref. No. 5203393)
1 pc. needle loom PROCTOR (Ref. No. 2162352),  heavy needler
1 pc. calander KUESTERS (Ref. No. 7113470), with spare cylinder for thermo embossing products
2 pcs. electronic jacquard machines STÄUBLI CX 860 (Ref. No. 4132997)
1 pc. band sewing machine for blankets JUKI (Ref. No. 5212076)
1 pc. foam mixer HANSA Top-Mix (Ref. No. 7141070)
2 pcs. gripper weaving machines SULZER G6100 (Ref. No. 4132998)
1 pc. quilting machine STEPPEX High Speed 84" Stand R (Ref. No. 5153275)
13 pcs. storing and transport wagons for warp beams (Ref. No. 4303060)
1 pc. drying chamber for hats RIEFENSTAHL (Ref. No. 713867-N)
1 pc. twin needle flat sewing machine PFAFF 1242 (Ref. No. 521868-N)

1 pc. card feeding system TRÜTZSCHLER FBK and other (Ref. No. 1141651)
mainly consisting of dosage funnel and flock feeder, EXACTAFEED FBK 536/4000
VPR device in addition for flock feeder FBK 536, Ventilator TVE 425 for de-dusting
High capacity condensor LVSA, material storage MS 1400, Ventilator TVD 425

1 pc. thermobonding line HOUGET-COMERIO (Ref. No. 2323121)
15  pcs. Jacquard Machines GROSSE EJP-2 (Ref. No. 4133369)
10 pcs. weaving machines RÜTI G 6100 (Ref. No. 4112879)

1 pc. yarn flow testing device RIETER-SCRAGG PPA 3 (Ref. No. 5232439)
year of construction 2001, to re-search the run/flow of POY, FDY and DTY cones

1 pc. storage for yarn cones (Ref. No. 5192442) suitable for 400 to 600 cones, paternoster system
1 pc. Continue-Dyeing Line FLEISSNER (Ref. No. 7233397) for needle punched and tufted carpets
1 pc. embroidery machine BERNINA 84083 (Ref. No. 812596), FORTRON Control with disk
1 pc. knoting machine FISCHER-POEGE (Ref. No. 4303308)
1 pc. needle loom DILO SND 25 (Ref. No. 2213205)
1 pc. oil pump VEB MECANICA (Ref. No. 4303309)
2 pcs. weft accumulators IRO GALAXY (Ref. No. 4303310), 4 ends
1 pc. ironing press (Ref. No. 8303350)
1 pc. yarn reel CROON + LUCKE HB 201 (Ref. No. 3302558)
1 pc. airjet weaving machines DORNIER LWV 4/E (Ref. No. 4142836)

1 pc. tearing machine SCHIRP (Ref. No. 1113398), 2 tambours
previously used for uncoated carpet waste, 1 spare tambour available

1 pc. Roll Up Machine OFF. CERRETO type AR 5500 (Ref. No. 5113240)
The rolling up machine AR5500 is an automatic machine which can form, wrap up and pack rolls of TNT of different weight.

1 pc. used quilting machine STEPPEX (Ref. No. 5153469)  twin seam
1 pc. textile printing machine MONTI ANTONIO (Ref. No. 7173304)
1 pc. stitchbonding machine LIBA COPCENTRA 2 Verbund (Ref. No. 5163207)
1 pc. laboratory carding machine Brand Name not known (Ref. No. 5232949)
31 pcs. weaving machines SULZER P7100 (Ref. No. 4113478)
13 pcs. weaving machines DORNIER HTV M/S + HTV 8/SD + HTV 4/SD (Ref. No. 4113479)
6 pcs. weaving machines TEXTIMA + GUESKEN (Ref. No. 4123406)

1 pc. pre needle loom FEHRER NL 9 (Ref. No. 2153190)
Single board down stroke, 5000 needles per linear meter
Batt feeder and plastic finger batt control. 2 sets of needle boards

1 pc. cross lapper AUTEFA Topliner CL 4000 (Ref. No. 2143189)
Fitted with profiling system controlled by a PC which allows complete control 
of profiling curves, accumulators, width, number of layers and height of exit conveyer 

1 pc. carding machine OCTIR (Ref. No. 2133188)
Automatic hopper with silos feed and Garnett Controls "Seven Series Rollaweigh" 
The card consists of a Breast, 2 carding sections, 1 side draw joining the first and 
second part cards. The first card lays down 2.5 metres into the second part.

1  pc. Nonwoven line OCTIR / AUTEFA / FEHRER  (Ref. No. 2113185)
1 pc. inspection table SCHWAB TSM S80 (Ref. No. 5172457)
1 pc. embroidery machine TAJIMA Type TMFD-G920 (Ref. No. 8123316)
1 pc. sample needle loom HUNTER (Ref. No. 2202280)
1 pc. sample carding machine (Ref. No. 523936-N)
1 pc. knitting machine SHIMA SEIKI SFE 201 T J7 (Ref. No. 8132746)
1 pc. warping and beaming machine BENNINGER Supertronic (Ref. No. 4173317)
17 pcs. warp beams (Ref. No. 4302758)
1 pc. air jet weaving machine PICANOL PAT-A (Ref. No. 4142555)
1 pc. production line for socks (Ref. No. 8132607) with 13 KUKA circular knitting machines
1 pc. knitting machine BOEGLI (Ref. No. 8133025)
1 pc. laboratory dryer ERNST BENZ AG SCHWEIZ TKF/M.600 (Ref. No. 7132409)
1 pc. complete woollen spinning plant OMMI / OCTIR / GAUDINO / SCHLAFHORST 
1 pc. single thread sample warping machine HERGETH-HOLLINGSWORTH (Ref. No. 4172768)
1 pc. single thread sample warping machine HERGETH-HOLLINGSWORTH MS-1800/8 

2 pcs. gripper weaving machines GÜNNE (Ref. No. 4131744)
with GROSSE Jacquard machine JEOS 124EX made in 1983

1 pc. gripper weaving machine GÜNNE (Ref. No. 4131746)
with STÄUBLI Jacquard machine for 20 shafts, actually running on 133 TPM

1 pc. Nonwoven line with calander (Ref. No. 2123212)
1 pc. carding machine THIBEAU CA 11, 1 pc. TRUTZSCHLER FBK, 1 pc. calander KUESTERS
with spare cylinder for thermo embossing products

3 pcs. overlock machines UNION SPECIAL MARK IV (Ref. No. 2312159)
4 pcs. inspection tables BURCH-GOSSAU (Ref. No. 5173176)
1 pc. sample carding machine BEFAMA (Ref. No. 5232925)
1 pc. circular knitting machine MAYER + CIE type MV4,II (Ref. No. 8132872)

1 pc. plant for fine shirting VAMATEX / BENNINGER (Ref. No. 8112811)
1a- 80 sets Vamatex P 1001 ES,  Rotary electronic dobby FIM RD 840 16 shafts with fast frames connections, b- 2 sets Benninger warpers  SCS, 1 Sucker sizing machine mod. ZTJF  double sizing 

54 pcs. weaving machines PICANOL PAT 2 RW (Ref. No. 4123123)
1 pc. weaving production VAN DE WIELE / GÜSKEN / EVILO (Ref. No. 8112802)
1 pc. weaving machine DORNIER GTV 2/SD (Ref. No. 4112873), incl. accessories, incl. knoter
668 pcs. OZ tension units (Ref. No. 3303298)
2 pcs. roving frames SAVIO COGNETEX SFC 22 (Ref. No. 3303078)
1 pc. tufting machine COBBLE ST 80 (Ref. No. 6133181)
1 pc. multi blender SEYDEL type 762 (Ref. No. 3303142)
1 pc. stretch breaker SEYDEL type 682 (Ref. No. 3303141)
3 pcs. ring spinning machines TEXTIMA type 2110 B (Ref. No. 3153140)
1 pc. ring spinning machine TEXTIMA type 2113 (Ref. No. 3153138)
1 pc. ring spinning machine TEXTIMA type 2111K (Ref. No. 3153139)
1 pc. Flyer for worsted yarn TEXTIMA type 1505/6 (Ref. No. 3303137)
1 pc. complete wallpaper printing line (Ref. No. 8112652)  EMERSON & RENWICK
1 pc. drawing frame SCHLUMBERGER GC 13 (Ref. No. 3141025)
1 pc. electrical heating group for fibre extruder FARE (Ref. No. 3232197)
1 pc. Monofilament line FARE type 45 K (Ref. No. 3232494)
1 pc. high speed folding cross cone winder HIRSCHBURGER Modell SE 250 D (Ref. No. 3193000)
1 pc. twisting machine HAMEL type 4/022 S (Ref. No. 3172999)
1 pc. package of various twisting machine (Ref. No. 3172418)
1.) Two-For-one Twister HAMEL type 4/021, 2.) Twisting machine HAMEL type 4/021
3.) Twisting machine HAMEL type 4/022 S, 4.) Twisting machine VOLKMANN VTS 06/2 
5.) Twisting machine SAURER ALLMA type TM 220 B, 6.) Doubling frame HIRSCHBURGER SE 250 D 
7.) High speed double frame cross winding machine HIRSCHBURGER type SE 250 D 8.) High speed double frame cross winding machine SSM type PSM 41 GR 46

5 pcs. two-for-one twisting machines VOLKMANN VTS 07 (Ref. No. 3182702)
1 doubling frame SAVIO with electron. length measuring
2 pcs. 2-for-1 twisters VOLKMANN VTS 06 (Ref. No. 3182703)
4 pcs. 2/1 twisters VOLKMANN VTS 07 (Ref. No. 3182704)
with Volcojet, 1 doubling frame RITE with electron. length measuring

1 pc. plating and twisting machine (cords machines) BOCCA COMORIO T2/SC (Ref. No. 3171754)

1 pc. carpet back coating line CAMPEN (Ref. No. 7143351)
consisting of:  Unwinding unit, J-Box, Accumulator,  Skew/Bow System,  Foulard,  Lick Roll applicator,  Stenter,  Pre Dryer,  Foam Application,  Stenter,  Secondary backig unit, 2 Infra-Red,  Gel-Dryer,  Print roller unit for ge-foam,  Vulcanisation dryer / cooling,  Side trimmers,  Accumulator MENZEL,  Cutting Units,  Winder and inspection zone,  Thermal oil heating installation,  Sucking System

1 pc. Nonwoven Line for production of Bentonit geo textiles (Ref. No. 2113425)
with needle loom FEHRER NL 6 / 3.600 mm

1 pc. spray bonding line (Ref. No. 2123307) with 3 spraying chambers and ovens, complete
line with fibre preparation, carding, bonding and wind up

4 pcs. textile dyeing machines VALD. HENDRIKSON (Ref. No. 7233145)
1 pc. Nonwoven Line (Ref. No. 2113116)
1 pc. carding machine MACKIE MK 8E (Ref. No. 3133074)
1 pc. accordion Pleating Machine RABOFSKY RABO 88 (Ref. No. 8303011)
1 pc. Accordion Pleating Machine RABOFSKY RABO 188/178 (Ref. No. 8303012)
1 pc. Mini pleater RABOFSKY R 88/60 (Ref. No. 8302534)

1 pc. needle loom FEHRER NL 28 S (Ref. No. 2163199), single board down stroke machine
compressive batt feed adapted from another machine

2 pcs. down filling lines LORCH J 520/2 (Ref. No. 830437-N)
1 pc. tufting machine PICKERING (Ref. No. 6133234),  suitable for artificial grass
1 pc. accumulator / J-Box ZOELLIG (Ref. No. 5113318)
1 pc. single needle long arm quilting machine STUTZNAECKER MAMMUT (Ref. No. 5153143)
1 pc. opening system TRUTZSCHLER (Ref. No. 1122906), multi mixer 4 stations
22  pcs. dry cans (Ref. No. 7133122)
1 pc. oven PROCTOR + SCHWARTZ (Ref. No. 7133093)
1 pc. quilting machine for pillows STYRTEKNIK HEKTOR (Ref. No. 5153169) (circle quilting machine)
1 pc. quilting machine STEPPEX Type SPRINT 84" Spr.SA2 (Ref. No. 5153136)

1 pc. coating line DOERRIS (Ref. No. 7143077)
suitable for laminating rolls of corrugated cardboard in C-B-E-F-G on cardboard

1 pc. carding line with 3 cardings machines WISE / HUNTER (Ref. No. 2132669)
- 3 pcs. bale openers WISE for blending, - 3 pcs. hopper feeders WISE
- 3 pcs. HUNTER carding machines, - 3 pcs. cross lapper WISE
- 1 pc. filter unit WISE, Optional: needle loom, spraying chamber, oven, winding / cutting section

1 pc. structuring needle loom DILO DI-LOOP DS 45 (Ref. No. 2212305)
1 pc. tearing machine RESTA (Ref. No. 1113029), suitable for foam and polyester fibers for fillings
17 pcs. Platt cards (Ref. No. 2133262)
1 pc. needle loom DILO DI-LOOP SD 45 (Ref. No. 2212572)
1 pc. woollen yarn spinning mill MAK / HDB (Ref. No. 3112771)
1 pc. pyrolisis oven for cleaning jets of extrusion lines SWISS CAB Type JET 40160 
1 pc. extruder (Ref. No. 3233101),  diameter of screw 50 mm
1 pc. staple fiber production plant (Ref. No. 2122683)
1 pc. fiber production line NEUMAG (Ref. No. 3232304) Polypropylene,  bale press AUTEFA
1 pc. double doffer carding machine SPINNBAU (Ref. No. 2132875)
1 pc. carding machine BEFAMA (Ref. No. 2132876), double hopper feeder 
1 pc. complete preparation line for wet spun linen yarns INGURA / LIBSCHER / MACKIE 
8 pcs. wet spinning frames KOSTROMA PM 88L6 + P; 114L8 (Ref. No. 3302600)
1 pc. winding machine GILBOS AW 10 (Ref. No. 3193400)
1 pc. hank to cone winder GILBOS AW 10 GF (Ref. No. 3191823)
1 pc. balling machine SIMA (Ref. No. 3303377)(round balls 100 g packing rope)
1 pc. press iron to transfer printing 1000 x 1300 mm CELSO (Ref. No. 7172634)
1 pc. plotter to print transfer paper MIMAKI (Ref. No. 7172635)
42 pcs. circular machines to manufacture KDK yarn (crinkle yarn) VITEX (Ref. No. 3302636)
42 pcs. circular machines to manufacture KDK yarn (crinkle yarn) CILINDI COCOLI 
1 pc. steam generator VAPORVIC (Ref. No. 8302639)

1 pc. shearing machine TORRES (Ref. No. 5242641), 
table spare, planning machine, detector of seams
fabric opener made by BIANCO, autom. guidance

1 pc. screen printing machine PANNON (Ref. No. 7172640)
automatic circular screen machines to print max. 8 colors, electrostatic flocking

1 pc. various machinery for thread production BARMAG / ICBT; LEZZENI, RPR, LEESONA etc. (Ref. No. 02674), such like two-for-one twisters (2 for 1 twisters), ring twisters, pirn winders, air tackers, machinery for dental floss, dye tubes and binders, tester etc.

1 pc. rapier weaving machine DORNIER HTV 8/J (Ref. No. 4133370)
EDU control, 8 colours, with GROSSE Jacquard machine, electronic type EJP-2, 1 x 2688 hooks

1 pc. impregnation line (Ref. No. 7143052)
preparation unit for glue with 2 tanks each 1000 liters, with pump PCM
foulard, one dryer FLEISSNER, 6 cylinder, with 3 gas burners MAXON, 
one band dryer MONFORTS with metallic conveyor,  2 gas burners FLAMECO
one lamination calander with 2 cooling rollers, one cutting machine ETF 
1 cross cutting machine MECCA, one re-winder

1 pc. complete linen spinning plant (Ref. No. 3112939)

1 pc. sieve drum dryer FLEISSNER (Ref. No. 713627)
year of construction ca. 2000 / NEVER USED
suitable for closed nonwovens of PP and PE spunbond and bi-component fibers

1 pc. needle loom FEHRER NL 21 - 2,64 (Ref. No. 2152941)
double board down stroke machine, 1.200 strokes/min, 60 mm stroke height, 10.000 needles/m

1 pc. band knife cutting machines KURIS RBS 300 E (Ref. No. 514122-N)
3 pcs. condensors TRÜTZSCHLER (Ref. No. 2301357)
1 pc. manual sample cutting press SCHRÖDER (Ref. No. 5201417)

1 pc. second-hand Nonwoven Line DILO (Ref. No. 2112938)
feeding tower, carding machine, lapper, needle loom, cutting unit
without winder and glue lamination,  used to produce needle punched coir mats for mattresses

1 pc. flow wrapper ILAPACK (Ref. No. 5192982),  with two labeler type ETIPACK TECHNOS 2.5
including Indy System, two labeler and a rotary die cut unit

1 pc. double sided ring twister SAURER ALLMA Allmat 200/600 (Ref. No. 3172664)
82 spindles per side x 2, 2 ply creel fitted with tensioners

2 pcs. two-for-one twisting machines SAVIO type GEMINI 244C (Ref. No. 3183048)
260 spindles each, preparation duo pot 2 x 6", exit 6" 4 20, MAGITEX, 16000 hours

2 pcs. tape lines SML FDY (Ref. No. 3233080), suitable for tapes 4, 6 and 8 mm

1 pc. complete spinning mill (Ref. No. 3112833)
with MARZOLI cards, VOUK draw frames, doubling VOIK, comber MARZOLI, roving frames MARZOLI, spinning frames MARZOLI, winders SAVIO, Autoconers, doubling RITE and HAMEL, twisting machines VOLKMANN and HAMEL

1 pc. dust remover HERGETH-HOLLINGSWORTH DR-4 (Ref. No. 1302452)
ySuitable for f.e. spinning mills which work with textile waste (recycled cotton and others) to reduce the dust from the material before it goes to the carding machines. 

1pc. roll cutting machine HILLESHEIMER MOLEY LIN 1600/500 (Ref. No. 5143105)
(single blade roll slicer), 1600 mm working width, reconditioned in 2002

1 pc. coating line (Ref. No. 7143103)
2 pcs. blending bins (Ref. No. 1133113)
1 pc. multi needle quilting machine PATHE (Ref. No. 5153046)
1 pc. inspection machine CAMPEN IT 006 (Ref. No. 5171489)
1 pc. coaster machine KEESE (Ref. No. 2301340), suitable for doilies, catering trade articles etc.
1 pc. coaster machine SUPERIOR GRAPHIC (Ref. No. 2301792)
1 pc. plissee capsule machine MARKHORST VP/6/H (Ref. No. 8302223)
1 pc. plissee capsule machine similar to MARKHORST VP/h (Ref. No. 8302225)
1 pc. packing machine PFANNKUCH VP 450 (Ref. No. 5192226)
1 pc. blister machine ILLIG R45 + S-Bli-45/03 (Ref. No. 5192230)

1 pc. folding and embossing machine for table towels HOBEMA 14 (Ref. No. 2302222)
folds 2 times, suitable for 2 colours, with embossing station and embossing roller + unwinder

1 pc. doubling frame ELITEX Autosuk 2008 (Ref. No. 3192200)
48 doubling heads, central suction

1 pc. pedal wheel tester FEINGERÄTE BAUMBERG BMX-B System Lisson (Ref. No. 5232432)
1 pc. roller chair testing machine FEINGERÄTE BAUMBERG (Ref. No. 5232431)

various spare parts for random carding machines FEHRER V 21 K 12 (Ref. No. 2301290)
sundry pipe valves and changing boxes TEMAFA (Ref. No. 2302213)

1 pc. surface inspection system ERHARDT + LEIMER (Ref. No. 2301851)
inspection technology with OL 2028 high speed cameras, system for identification of thick and 
thin sections, mechanical damages and contaminants in the material

1 pc. tufting machine COBBLE ST 88 (Ref. No. 6132945)
1/10" loop pile straight needle bar, modular gauge parts
mega shifter on spike-rolls, without roller/ unroller

1 pc. foam application ZIMMER Variopress (Ref. No. 714351)
1 pc. moulding press OTT (Ref. No. 5202256) 270 bar pressure, 2000 x 1600 mm sliding table
1 pc. hopper feeder DELL ORCO (Ref. No. 1142246), with cyclone/separator, without scale
1 pc. bale cutter COMETA (Ref. No. 1302247) for use in textile waste recycling preparation

1 pc. storage equipment consisting of high rack and high rack fork lift (Ref. No. 5193035)
High Rack Fork Lift made by STEINBOCK type WA 12, made in 1997, 2800 working hours
freely programmable for all switch on and switch off and closing functions 
Rack System made by GALLER type OMEGA, made in 1996
Suitable for storing palettes 800 mm wide x 1.200 mm deep + different height

1 pc. nonwoven line SPINNBAU / AUTEFA / DILO (Ref. No. 2112829)
with 1 bale opener, fine opener, carding machine, cross lapper, needle loom OUG type (upstroke and downstroke), accumulator, winder

1 pc. bin emptier TEMAFA (Ref. No. 1131637) with 2 chambers each 1500 kg PES
1 pc. roll cutting machine MENZEL 96 RS (Ref. No. 5142775) (single blade roll slicer)
1 pc. roll cutting machine PSA GMBH DSF-K (Ref. No. 5142852)
1 pc. roller cutting press SANDT (Ref. No. 5202786)
1 pc. conus warping machine HACOBA USK 1000-e (Ref. No. 4173039)
4 + 1 pc. tumble dryers PASSAT 178 D (Ref. No. 7132400)
1 pc. batching unit type winder (Ref. No. 5112864)
1 pc. slitter CAMERON (Ref. No. 5142031)
1 pc. pillow machine OKE type AVANTI Horizontal (Ref. No. 8302785)
1 pc. continuous cloth drying machine SIMPLEX (Ref. No. 7132219)
2 pcs. auto cutters LECTRA ELA 130 (Ref. No. 5142009)
7 pcs. chutes HERGETH / TRÜTZSCHLER (Ref. No. 1142312)
1  pc. carding willow (Ref. No. 1122859)
1 pc. single cylinder fiber opener (Ref. No. 1122860)
1 pc. Fearnought (Ref. No. 1122861),  with metal swift
1 pc. portable set re-clothing kit + grinders (Ref. No. 2302865)
1 pc. hopper feeder (Ref. No. 1142947) being used on Polyester but can process Hemp as well
1 pc. slitter/rewinder MENZEL (Ref. No. 5142254)

1 pc. carding machine (Ref. No. 2132857), double hopper with chute
compact card, single doffer and workers + strippers + spares

10 pcs. bale openers (hopper feeders used as bale openers) various brands such like HERGETH / FIBER CONTROLS / CHADWICK / CLIFFE (Ref. No. 1152856)

1 pc. drum dryer FLEISSNER (Ref. No. 7132451)
independent in feed 4 perforated steel cylinders and separate cooling drum
also has 2.00 mm nip rollers with water chilled after oven

1 pc. stenter frame ARTOS (Ref. No. 7122450), chain is clip only, 
entry has unwind unit, J-box, 3.000 mm wide Morton pad,  knife over plate coating head
 with foamer, exit has j-box and surface wind batcher, exit has plaiter or centre wind A-frame

1 pc. stenter frame ARTOS (Ref. No. 7122446)
entry has unwind unit and J-box, exit has plaiter or centre wind A-frame

1 pc. compact card D + F (Ref. No. 2132390)
tandem feed with new petty vibra feed update DUESBERG comb or Doffmaster, 

1 pc. stenter frame ARTOS (Ref. No. 7122449)
heating system, 5 direct gas heated bays, chain has pin or clip facility, 
entry has unwind unit, J-Box, KÜSTERS pad mangle and ZIMMER single colour rotary screen 
printer, exit has plaiter or centre wind A-frame

1 pc. sectional warper COMAT (Ref. No. 4172493)
solid steel cone, creel 360, formerly used for spun yarns

1 pc. used thermobond Nonwoven Line ASSELIN / DILO / BOMBI (Ref. No. 2112830)
with bale opener, carding machine, lapper, needle loom OUG type
(upstroke and down stroke), drum dryer, calander, accumulator, winder

1 pc. RF dryer with two generators STALAM (Ref. No. 7132341)
used for drying cones and hanks, 16.000 mm length, 1.500 mm width

1 pc. winder EDELMANN Maschinenfabrik (Ref. No. 5111438)
sleeveless winding: The machine is suitable for continuous wind up of material in connection
with the accumulator mounted before the winder (8-12 m), - automatic advance into the catching winding axle, - winding phase with automatic length measuring control, - cross cut
- positioning of winding end, - lifting the wind and push out the roll

1 pc. Cutting Machine KAMPF KS 106 GL (Ref. No. 5142927)
cutter system = scissor's cut, cutting width starting from 20 mm, contact winding

1 pc. used sieve drum dyer (suction dryer) (Ref. No. 7132712)
accumulator (trough), radioactive mesuring device MAHLO Gravimat FMID-7a
oven heated by direct gas, relatively new burners, entry to sieve drum dryer, sieve drum dryer (suction dryer), accumulator, material guidance, re-winder, Controls are modernized

1 pc. thermal bonded non woven air laid line LAROCHE / DAN WEB / ABB (Ref. No. 2112818)
The line was making a two-ply thermally bonded substrate that was used the production of a feminine protection pad substrate.

1 pc. twisting machine ALLMAT 240/600 (Ref. No. 3172776)
1 pc. winding machine SSM - SCHÄRER SCHWEITER METTLER AG (Ref. No. 3192638)
1 pc. sectional warper HACOBA USK/1000 (Ref. No. 4172155)
1 pc. roll machine (inspection machine) BIANCO (Ref. No. 5111837)
1 pc. slitter/rewinder ATLAS LT-2 (Ref. No. 5142902)
1 pc. raising and shearing line MARIO COSTA (Ref. No. 7212468)
6 pcs. tape condensers OCTIR (Ref. No. 3302465)
1 pc. shoemaker repairing machine PFAFF MAUSER SPEZIAL Class 8346 (Ref. No. 5212411)
1 pc. warping machine BENNINGER ZC-L 1400 (Ref. No. 4172554),  length measuring
1 pc. embroidery machine ZANGS model 121R (Ref. No. 8122661)
1 pc. embroidery machine METALLMECCANICA modell M56 (Ref. No. 8122662)
1 pc. embroidery machine NG (Ref. No. 8122663)
4 pcs. dryer PASSAT type 178D (Ref. No. 7132346)
1 pc. fancy yarn machine LEZENI TF-DS (Ref. No. 317927-N)
1 pc. fancy twisting machine SAURER ALLMA DZ-ESS (Ref. No. 317926-N)
1 pc. fancy twisting machine SAURER ALLMA DZE (Ref. No. 317925-N)
1 pc. table welding machine for foils bags (Ref. No. 5192410), to close bags made from foil
1 pc. needle loom GARNETT BYWATER KBN (Ref. No. 2152164)
1 pc. palletizer STERMA (Ref. No. 5192987)
3 pcs. weaving machines shuttleless STB type 2-390 (Ref. No. 4122821)
1 pc. conveyor band (Ref. No. 8302128)
1 pc. spinning machine FEHRER DREF II 24 (Ref. No. 316108-N)
1 pc. stenter frame ELITEX NSF 4580.3 (Ref. No. 7122591)
1 pc. two stage bleaching line BENNINGER Extrakta (Ref. No. 7152593)
1 pc. sizing machine SUCKER (Ref. No. 7162594)
1 pc. warping machine TOTEX (Ref. No. 4172595)
2 pcs. automatic winding machines KARL MAYER RC6L (Ref. No. 3192596)
with electron. cleaners LOEPFE FR 600, knoters MAYER KNF 1
2 pcs. automatic winding machines SAVIO RAF 15 (Ref. No. 3192597), cleaners PEYER PI 120
1 pc. autoconer SCHLAFHORST 138 (Ref. No. , 3202598), cleaners LOEPFE, splicer
76 pcs. weaving machine STB (Novosibirsk + Ceboksar) type 3000 (Ref. No. 4122668)
27 pcs. shuttleless weaving machines STB 1-360 (Ref. No. 4122822)

various accessories for flat bed lamination machines and similar (Ref. No. 7142778)
2 pcs. relatively new powder scattering machines, unwinding station with 6 positions with brake 

1 pc. carding machine with card feeding HERGETH (Ref. No. 2132990)
Cardfeeding, Trützschler feedbox MS 191 with MAS separator, YOC 1998
Hergeth transport fan TV 300, Pressure control system, Hergeth Masterchute MC 2500,
Hergeth WZM card K5-D2, 2 condensing rollers

1 pc. needle punch nonwovens production line LAROCHE / THIBEAU / ASSELIN (Ref. No. 2112317)
consisting of: LAROCHE blending line, THIBEAU Carding line, ASSELIN lapping - needling line

1 pc. needle loom FEHRER NL 28 (Ref. No. 2162943)
1 pc. needle loom DILO DI-LOOM OD-1 (Ref. No. 2162697), single board down stroke machine
1 pc. bale press for PSF AUTEFA (Ref. No. 1153003)
1 pc. bale press LUMMUS (Ref. No. 1153004)
1 pc. bale press LINDEMANN (Ref. No. 1153005)
1 pc. BCF Extrusion line NEUMAG (Ref. No. 3232805)

1 pc. single colour printing installation (Ref. No. 7173055)
Accumulator 1 MENZEL, Turning frame on Accumulator 1 made by E + L, 
Cylinder dryer WUMAG, Cooling Drum after Dryer FLEISSNER, Accumulator 2 MENZEL, 
Turning frame on Accumulator 2 made by E + L, Cutting unit FREMA, Winder FREMA, 
Turret Winder MENZEL, Hydraulic machine REXROTH, 
Printing machine with engraved rollers for single colour print

1 pc. complete nonwoven line (Ref. No. 2113053)
cFiber Chamber 1 and 2 TEMAFA, De-Dusting Installation CROSCLEAN, 
Bin Emptier TEMAFA, Hopper Feeder for Card 1 TEMAFA, Carding Machine 1 FOR, 
double doffer with mechanical hacker, with edge suction and dust separator box
Camelback Lapper for Card 1 BIKI, Squeezing roller 1 BIKI,  Hopper Feeder for Card 2 TEMAFA, 
Carding Machine 2 made by FOR, Camelback Lapper for Card 2 BIKI, 
Squeezing roller 2 BIKI, Hopper Feeder for Card TEMAFA,Carding Machine 3 made by FOR, 
Camelback Lapper for Card 3 LESTI, 2 pcs. needle looms FEHRER, cutting unit, edge trimmer etc.
oven FLEISSNER

1 pc. roll packing machine ASIM Rollpack (Ref.No. 519706-N), 2 packings per minute
packing module Rollpack 30 B TK, automatic feed of packing goods
welding seam 3.000 mm, longit. welding: double with mechan. separation of Polyethylen foil

1 pc. thermobonding line HERGETH / TRÜTZSCHLER / RAMISCH / MENZEL (Ref. No. 2122937)
21 pc. 2-roller thermobonding calander RAMISCH KLEINEWEFERS RKK 230 (Ref. No. 7112991)
1 pc. mass meter FAG type FH46 MBE (Ref. No. 5222992), traversing unit

1 pc. fibre preparation unit (Ref. No. 1132989), Hergeth blending feeders HF, 
Hergeth conveyor belt FB, Hergeth MZ opener, Hergeth magnetic trap, Hergeth control panel SSM+SS, digibalance, Hergeth feedbox FS 5 with KD condensor ( fiber recycling), Trützschler 
Fibre mixing room MPM6/1200, Trützschler BEC 1200 feedbox, Trützschler TFV 1200 opener

3 pcs. weaving looms VAN DE WIELE (Ref. No. 4162708), with STÄUBLI + TAKEMURA
1 machine VAN DE WIELE type MPS

2 pcs. warping machines BARBER COLMAN (Ref. No. 4172936)
with creel HACOBA, suitable for glass fibers

2 pcs. tufting machines COBBLE ST 91 LX2 (Ref. No. 6132675), loop pile 1/10" gauge
pile height 3 to 10 mm, with creel, aux. feeding rollers, PIV for cloth and yarn feeding, patterning device, jute mover, winder, PEP mending gun, aux. equipment

1 pc. tufting machine PICKERING (Ref. No. 6132646), 1/8" gauge cut pile, with Co-Matic1 pc. tufting machine PICKERING (Ref. No. 6132647), 1/10" gauge loop pile

1 pc. powder dot coating line VILLARS + KOLLER (Ref. No. 7142615)
twinding/unwinding from A-frame to A-frame, 3 pcs. powder rollers as spare
Infrared tunnel 2.000 mm, installed 40 KW, cooling device

1 pc. continuous cutting machine CALEMARD TCF 2400 (Ref. No. 5141203)
80 knives, cold and hot cutting knives

1 pc. gripper AXMINSTER carpet loom (Ref. No. 416284-N)
with Jacquard Axminster/Bonas, construction year 1997
computer equipment, software NETHGRAF, yoc 1997
machine made in 1970, but completely reconstructed by Crabtree
complete with creel and warp beams

76 pcs. weaving machines STB 330 (Ref. No. 4122823)
1 pc. melt blown bar for spunbond lines REIFENHÄUSER (Ref. No. 2122820)

1 pc. tearing machine WILSON KNOWLES (Ref. No. 1112458)
2 cylinder pulling line with, 1.400 mm wide shredder
continuous baler and ducting cyclones, delivery wheels etc.
(The machine is based on Dell Orco and most parts are interchangeable)

1 pc. dyeing foulard KUESTERS 222.11-2000 (Ref. No. 7112867)
A-frame-winder on exit MENZEL Hydraulic Winder
2 pcs. weaving machines SACM MAV-S-U 165 (Ref. No. 4122688)
1 pc. pre needle loom / drum tacker ASSELIN (Ref. No. 2172653)
1 pc. needle loom ASSELIN (Ref. No. 2152654), double punch, 7.000 needles/m

1 pc. winder / re-winder CAMPEN type Rollrobot TWA-1 (Ref. No. 5112903)
suitable for re-winding from large diameter rolls to short rolls in adjusted length
incl. automatic cross cutting including cutting out defects and seams

1 pc. testing machine ZWICK Z2.5/TN1 S (Ref. No. 5232420)
testing machine with clamps and also additional clamps (yarn)
good condition, incl. manual and software for connection to a PC for evaluation of tests

1 pc. fine opener TEMAFA modell FOZ (Ref. No. 1122709)
1 pc. blanket calander (band calander) BATES (Ref. No. 7112862)

1 pc. cutting machine HAUSER QLA 1000 (Ref. No. 5142926)
The machine can make sheets from roll goods and places the sheets to a table.

3 pcs. airjet weaving machines TRUSTFIN (Czech. Rep.) TECHNO 240 GT (Ref. No. 4142885)
suitable for technical fabrics from cotton, filament, glass, fabrics and polyolefine, SDS system

1 pc. airlay carding machine DOA type 1112 + D-2400 (Ref. No. 2133014)
incl. feeding tower, incl. FLEISSNER sieve drum dryer with 3 drums

1 pc. needle loom DILO OM 25 (Ref. No. 2153015)
stripper moveable on feeding side, incl. waste exit below the stitch plate

1 pc. 3-fold weighning group TRÜTZSCHLER (Ref. No. 1302970)
with fine opener (feeding towers and condensors not included)

1 pc. double sided ring twister SAURER ALLMA Allmat DZ 200/600 (Ref. No. 3172665)
1 pc. double sided ring twisting machine SAURER ALLMA Allmat DZ 200/600 (Ref. No. 3172666)
1 pc. drum dryer WUMAG (Ref. No. 7131763)
1 pc. washing machine FLEISSNER T 3639 (Ref. No. 7221630)
1 pc. re-winder (Ref. No. 5111764)

1 pc. dyeing foulard RAMISCH-KLEINEWEFERS Bicoflex (Ref. No. 7111619)
adjustable pressure: right/left outside 2 bar, to center 2 x 3 bar, middle 5 bar
pneumatically lowered tray, washing pipes available, 1 Emergency-Stop tow

1 pc. Laser edge cutter  (Ref. No. 5141618)
1 pc. drum suction dryer FLEISSNER (Ref. No. 7131444)
1 pc. latex application device + foulard CAMPEN (Ref. No. 7142788)
2 pcs. accumulators (Ref. No. 8302478)
1 pc. lapper HERGETH type 671 (Ref. No. 2142986) 3.000 mm lay down width

1 pc. quilting machine STUTZAECKER VMK 3 NR 330 KST (Ref. No. 5152930)
3 needle bars, chain stitch machine, with cam control, CE machine
Original thread breakage detectors for upper and under tread
incl. original Mammut frequency drive for the main motor, machine speed can be regulated.

1 pc. raising machine LAMPERTI (Ref. No. 7212985)
1 pc. sample needle loom BYWATER (Ref. No. 2201270)
1 pc. needle punching machine FEHRER RDF NL 21 (Ref. No. 2162782)  double board
1pc. steam generator AALBORG (Ref. No. 7132529)
1 pc. rotary cutter LAROCHE CR 500 (Ref. No. 514838-N)
1 pc. tufting machine TUFTCO (Ref. No. 6132962) 5/32" cut pile staggered needle bar
1 pc. tufting machine COBBLE (Ref. No. 6132963) 1/8" gauge loop pile
1 pc. friction spinning machine FEHRER DREF II (Ref. No. 3162396), 6 spindles

1 pc. yarn winder GILBOS GF 10 R (Ref. No. 3192677)
individual drive for each spindle, suitable for winding thick natural, synthetic and
blended yarns 0.4 up to 20 Nm on cylindrical yarn, cones 340-450 mm

1 pc. nonwoven line ALEXANDRE et ANTOINE / ASSELIN (Ref. No. 2112682)
consisting of: feeder CPM, carding unit, belt web spreader, cylinder needle loom ASSELIN type 169
needle loom ASSELIN downstroke, needle loom ASSELIN upstroke, needle loom ASSELIN down stroke, compensator, cutter, winder, suitable for non-wovens using PE, PP, PA fibers

1 pc. carpet back coating line SANTA LUCIA (Ref. No. 7142678)
suitable as padding-coating-laminating machine for tufted carpets and floor finishing
sewing machine, unwinder, accumulator, brushing machine, ager, weft straightener, knife coating head, dryer-tensioner, chain coating head, powder dosing device,
J-Box, infrared frame, laminating and embossing calander, cooler,
edge cutter, accumulator, transversal cutting knives, winder

1 pc. coupon machine ETF (Ref. No. 8302275)
consisting of: roll entry and roll return, unwinding station, length measuring device
cross cutter, turning device for carpet pieces (to wind on short length)
longit. cutting device, foil suspender, sleeve suspender, winding station

1 pc. band saw KURIS (Ref. No. 5141960) with table
1 pc. autoconer SCHLAFHORST AC 238 (Ref. No. 3202826)

1 pc. complete tufting line (Ref. No. 8112696)
consisting of: 2 pcs. tufting machines COBBLE ST 91 LX2
1 pc. yarn winder GILBOS GF 10 R, 1 pc. carpet back coating line SANTA LUCIA
1 pc. inspection machine SELF-MADE

1 pc. positional transfer printing machine SAMIT (Ref. No. 7172633)
ready to print in continuous and positional over curtains, garments and underwear

1 pc. shrinking oven MONFORTS TOPTEX (Ref. No. 7132441)
with the stabilizing calander for light woven and knitted fabrics without big batch winding device

1 pc. inspection/rewinding machine MAAG (Ref. No. 5171045)

1 lot of fiber / yarn production equipment, in detail: (Ref. No. 3302884)
RIETER c1/2 6, RIETER a7/2 1, RIETER e2/4a 1, RIETER 4/1a 1, RIETER 7/4 6 1976
KRUŠIK TG-5 4 1990, NITRIANSKE STROJ. PS551 R 2 1991, NITRIANSKE STROJ. PS552 R 2 1991
SCHLAFHORST GK U-X 2, AUTO SUK ELITEX 2008 2, UNIREA ZOFB 8 1982, STROJTEX 8LR 2

1 pc. weaving production VAN DE WIELE / GÜSKEN / EVILO (Ref. No. 8112802)
Face to Face Velvet Weaving Machines VAN DE WIELE  Type: MPS 32 
Face to Face Velvet Weaving Machine Gusken, Automatic Bobbin winders: EVILO
-Type: Pro Winder Automatic - 3 Automatic Machines for Rewinding of Residues KARL MAYER

1 pc. punching machine for pads from cotton wool EBM (Netherlands) (Ref. No. 5202754)
suitable for round cotton pads, 24 punching places, package size: 40 to 100 pieces per tube foil

1 pc. Nonwoven Line TATHAM/AUTEFA/FEHRER (Ref. No. 2112266)
1 pc. lubrication device TEMAFA (Ref. No. 2302218)
1 pc. clicking head cutting press CHIESA (Ref. No. 520460)
1 pc. spinning machine FEHRER DREF 2000 (Ref. No. 3162525)

1 pc. conditioner MOREL FRERES F.2.t. FULLY AUTOMATIC (Ref. No. 3301742)
bobbin humidification line, bobbin humidification inside - outside adjustable in combination

1 pc. thermobonding calander used for nonwovens RAMISCH KLEINEWEFERS RKK 230 (Ref. No. 7112568), consisting of: unwinder, two roller calander, winder, hydraulic and oil installation, controls cabinets and panels, suitable for PP, PES, PA and blends, 30 - 150 gr/sqm
working pressure 50-80 N/mm, winding diameter 1200 mm, heating medium fuel oil

1 pc. 3-roller roll- and smoothing calander KLEINEWEFERS K 60/3 (Ref. No. 7111822)

2 pcs. precision winding machines SAHM Makromat (Ref. No. 319893-N)
for cylindrical and conical cones, 4 winding heads each

1 pc. needle loom FEHRER NL 9 S (Ref. No. 2152841)
1 pc. needle loom FEHRER NL 9 S (Ref. No. 2152842)
1 pc. guillotine cutting machine PIERRET P 28 R 1 (Ref. No. 5141329)
1 pc. cutting machine PIERRET P 28 R 1 type G 28 R 1 (Ref. No. 5142891)
1 pc. roll cutter WASTEMA STV 1800/R (Ref. No. 5142667) with circular blade

1 pc. needle loom DILO DI-LOOP OD-SV-25 (Ref. No. 221217-N)
3 mm lamella bed to produce Diloop and velour products

1 pc. sieve drum washing line FLEISSNER (Ref. No. 7222835)
steamer with material guidance, 120 m content, 6 sieve drum bathes, 6 squeezers
The line could be combined with a dwell pool if  used for retreating printed or dyed material.

1 pc. bleaching line ZITTAU PAD ROLL type (Ref. No. 7152592)
1 pc. edge trim opener TEMAFA (Ref. No. 1112306)

1 pc. tufting machine TUFTCO SUPER GRAPHIC (Ref. No. 6131875)
2 needle bars 1/8" gauge, computer controlled split rolls for design, "state of the art" machine

2 pcs. hackling machines MACKIE / STEPHEN COTTON BELFAST (Ref. No. 3301831)
autom. Mackie spreader, autom. can changer BAHMER

3 pcs. tufting machine heads COBBLE (Ref. No. 6132582)
The machines have not been rebuilt but are in the process of being setup for various configurations. Each tufter has a dial adjust needle bed for pile height variations and adjustable needle stroke. Needle bars and hooks are not included.

6 pcs. projectile weaving machines SULZER TW (Ref. No. 4112406)

1 pc. edge trim opener SCHIRP (Ref. No. 1112858)
2 pcs. wind up units for carpet rolls and similar (Ref. No. 5112272)

1 pc. Nonwoven Line (Ref. No. 2112073)
suitable for blended fibers from natural + PP fibers or glass fibers + PP
carding line 3.000 mm, cross lapper, drum tacker, finishing needle loom
cross and longit. cutting machine, winder 3.000 mm width

1 pc. square meter measuring device MAHLO Gravimat FMI 9 B (Ref. No. 5222921)
Krypton 85 radiator, remaining life time of radioactive radiator approx. 2 years

1 pc. tufting machine COBBLE ST 91 LX2 (Ref. No. 6132676)
1/4" gauge loop pile, pile height 5,5 - 12 mm, with creel, aux. feeding rollers,
PIV for cloth and yarn feeding, jute mover, winder, PEP gun, aux. equipment

1 pc. needle loom FEHRER NL 28 S (Ref. No. 2152065)

1 pc. weaving machine PICANOL GamMax 6-R Freiflug (Ref. No. 4122751)
12 shafts, STÄUBLI dobby 2622 made in 2004, ELSY device
warp thread contrl GROB 1200 / 8 lines 15 mm gauge, rails height 13 mm
8 colours, 6 used, 4 feeders PICANOL Chrono x 2, 2 cloth beams, without warp beam
12 shafts GROBEXTRA ALFORFIX

1 pc. weaving machine SULZER G6300-2200 Freiflug (Ref. No. 4112752)
16 shafts, STÄUBLI dobby 2670 made in 2003, 4 feeders ROI CHRONO HS
12 shafts GROBEXTRA ALREFIX

1 pc. weaving machine VAMATEX Leonardo FTS 2200 Freiflug (Ref. No. 4122753)
A 625 Actex, 4 feeders ROI CHRONE HS, 12 shafts OMV Speedfix

1 pc. embroidery machine PFAFF KSM 220 (Ref. No. 8122503)
18 heads, 8 colours, 450 mm embroidery field depth, head distance 162 mm
The machine is with:
upper and lower thread control, upper and lower thread cutter
light, electr. spooler for lower thread, pneumatic connection
speed adjustment by keyboard, autom. colour change
large gripper, memory capacity of 250.000 stitches
connection for tape reader and disc, border frame

1 pc. embroidery machine PFAFF KSM 220 (Ref. No. 8122504)
1 pc. embroidery machine PFAFF KSM 220 (Ref. No. 8122505)

25 pcs. airjet looms SOMET Clipper + Mythos (Ref. No. 4141732)
LoomN Loomtype Age Jacquardtype Age Format Reedwidth Prewinder
1 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
2 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
3 Somet Clipper 1998 LX1600 3072 227 cm LGL Sirio JET DSR
4 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
6 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
7 Somet Clipper 1998 CX880  2688 227 cm ROJ Super ELF
8 Somet Mythos 2001 LX1600 3072 236,5 cm LGL Sirio JET DSR
9 Somet Clipper 1998 LX1600  3072 227 cm * LGL Sirio JET DSR
10 Somet Clipper 1999 LX1600 3072 320 cm ROJ Super ELF
11 Somet Clipper 1999 LX1600 3072 227 cm ROJ Super ELF
13 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
14 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
15 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
16 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
17 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
18 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
19 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
20 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
21 Somet Clipper 1999 LX1600 3072 230,5 cm * LGL Sirio JET DSR
22 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
24 Somet Clipper 1998 LX1600 3072 227 cm ROJ Super ELF
25 Somet Clipper 2000 LX1600 3072 230,5 cm * LGL Sirio JET DSR
26 Somet Clipper 2000 LX1600 3072 230,5 cm * LGL Sirio JET DSR
27 Somet Clipper 2000 LX1600 3072 230,5 cm * LGL Sirio JET DSR
28 Somet Clipper 2000 LX1600 3072 230,5 cm * LGL Sirio JET DSR

1 pc. edge trim opener HOLLINGSWORTH type SHREDMASTER (Ref. No. 1112511)
4 pcs. box feeders MASIAS (Ref. No. 1141989)
1 pc. metal detector (Ref. No. 1301640)
1 pc. carding machine BEFAMA CU641/2500 (Ref. No. 2132693)
1 pc. carding machine BEFAMA CU641 (Ref. No. 2132694)
1 pc. carding machine BEFAMA CU611 (Ref. No. 2132695) with volumetric hopper feeder
1 pc. carding machine (Ref. No. 2132507) 2with two hopper feeders
1 pc. cross lapper BEFAMA 5W43 (Ref. No. 2142690)
3  pcs. camelback lappers (Ref. No. 2142168)
1 pc. needle loom DILO NFZ (Ref. No. 2152689)

1 pc. Nonwoven line (Ref. No. 2112616)
specially designed for recycled fibers, formerly used for production of under felts
consisting of: HDB carding machine double doffer, card clothing re-newed, lapper
needle loom DILO double board, The line was used for jute, acrylic, cotton and its bends

1 pc. Extruder (twin-screw-extruder) REIFENHAUSER Bitruder BT 550 (Ref. No. 3232623)
torque 550 Nm, direct current drive 24 KW, 3,7 to 37 rpm
screw diameter 50/105 conical nitrated, temperature 200 C max.

1 pc. printing machine (Ref. No. 7172004)
1 pc. powder dot coating line CARATSCH AG 5620 (Ref. No. 7142437)
2 pcs. fields for use in Monforts Stenter Frames MONFORTS (Ref. No. 7122108)
1 pc. tumble dryer PASSAT 178 D (Ref. No. 7132011), 4000 l drum contents
1 pc. shrinking machine AMDES (Ref. No. 7132209)
1 pc. second-hand Hot Flue HUNT + MOSCROP (Ref. No. 7132781)
1 pc. powder dot coating line CARATSCH AG 5620 (Ref. No. 7142436)
2 pcs. stitchbonding machines MALIWATT type 14010 (Ref. No. 5162763)
2 pcs. stitchbonding machines MALIMO type Maliwatt 14011 (Ref. No. 5162643)
1 pc. thermo channel (Ref. No. 7132719)
1 pc. cylinder dryer CARROL/WUMAG (Ref. No. 7132005)

1 pc. shearing/raising machine MARIO CROSTA (Ref. No. 5242278)
1 Unwinding device, 1 Electronic unrolling device, 1 Double drum raising machine Type MC 20/24
(with two drums one a top of the other, each drum with 20 or 24 raising rolls), 1 Steel feeding roller
1 Microprocessor, 1 Compensating device, 2 Double drum raising machine Type MC 20/24
(with two drums one a top of the other, each drum with 20 or 24 raising rolls)
1 Compensating device, 2 Shearing machine Type CMB, 1 Rolling up device, 1 Drafting device
1 Spare shearing element, - 24+24 spare raising rollers, - 820 m of garniture

8 pcs. terry weaving machines PICANOL MDC (Ref. No. 4151519)
complete with harnesses, incl. VERDOL Antares Jacquard machines

10 pcs. projectile weaving machines SULZER RUTI P7100 B390 F1 EP D1 1991 (Terry) (Ref. No. 4152806), with CAM Motion and 7 heald frames, length of towels can be programmed

1 pc. projectile weaving machine SULZER RUETI P7M R3 S280 N4 SP D12 (Ref. No. 4112935)
With 4 colour weft insertion with double pick insertion function, microprocessor controlled.
Dobby for maximum 18 heddle frames, 18 shaft tractions installed. Equipped for the weaving of multifilament fabrics in one width, maximum usable reed width up to 2,834 mm.

1 pc. Steamer XORELLA Xorella-Contexxor (Ref. No. 3302887)
4 steam heated zones supplied from boiler at 125 PSI
180 deg 50" wide conveyors feed and handle discharge from conditioner.

1 pc. Xorella yarn conditioner (Ref. No. 3302880)
1 pc. winder GILBOS (Ref. No. 3191901), 6" traverse, 5:57 take up cone or tube supply
36 pcs. double covering machines RPR type GSP16/2E (Ref. No. 3192481)
85 pcs. single covering machines ICBT type G316-E (Ref. No. 3192482)
5 pcs. commingling frames BARMAG FK-M80 (Ref. No. 3192483)
2 pcs. spoolers ICBT HS 15 (Ref. No. 3192492)
1 pc. double covering machine ICBT G316-E/307 (Ref. No. 3192488)
30 pcs. single covering machines ICBT type 316-EM (Ref. No. 3192489)
10 pcs. spoolers (rewinders) RAITI (Ref. No. 3192490)
18 pcs. spoolers (rewinder) CURAT (Ref. No. 3192491)

60 pcs. double covering machines ICBT Type G308 (Ref. No. 3192480)
Max.dia. of Take-up Package: 200mm Biconical, Tube Length: 230mm, 200mm Traverse

5 pcs. pirn winders LEZZENI CLV200 (Ref. No. 3192603)
1 pc. air tacker / winder RPR model GRB4 (Ref. No. 3192606)
12 pcs. 2/1 (two-for-one) twisters BARMAG DD39 (Ref. No. 3182485), 250 mm pot diameter
2 pcs. 2-for-1 twisters BARMAG WT-1E (Ref. No. 3182602)
1 pc. twisting machine HAMEL 4/021 DDC (Ref. No. 3171812), 96 spindles
1 pc. twister ICBT Model T349-20 (Ref. No. 3172588)
6 pcs. two-for-one twisters RPR GC-72D (Ref. No. 3182604)
10 pcs. two-for-one twisters RPR ST 120 (Ref. No. 3182605)
14 pcs. two-for-one twisters VOLKMANN VTS 09 (Ref. No. 3182855)
1 pc. worsted spinning frame COGNETEX (Ref. No. 3151900)
1 pc. winding machine SOTEXI Pik-Pik type DED (Ref. No. 5112300)
1 pc. tape extrusion line (Ref. No. 3232897)
1 pc. side feeder MAPRE (Ref. No. 3232713)
1 pc. needle loom FEHRER NL 6 S (Ref. No. 2162190)
1 pc. stenter frame ARTOS (Ref. No. 7122684), liquid gas, 5 chambers, with foulard KÜSTERS
Large lot of second-hand A-frames (Ref. No. 5112114)
1 pc. roll reverse winder MENZEL (Ref. No. 5112007)
1 pc. perforation machine BURCKHARDT (Ref. No. 5142110)
1 pc. clicking head cutting press SANDT (Ref. No. 5202772)
1 pc. packing machine FITE (Ref. No. 5192008)
1 pc. weight measuring device LFE (Ref. No. 5231639)
1 pc. strength testing machine USTER Dynamat 1 (Ref. No. 5231468)
1 pc. double ended pile box (Ref. No. 5231472) with rubbers and mounting jig
1 pc. single fibre length measuring WIRA (Ref. No. 5231473)
1 pc. board wrappers (Ref. No. 5231474)
1 pc. wrap reels (Ref. No. 5231475)
1 pc. analyser SHIRLEY (Ref. No. 5231476)
1 pc. Photometer (Ref. No. 941212), to proof Formaldehyde in materials
1 pc. SIGMASKOP (Ref. No. 941211), as new (thread counter)
1 pc. sound absorbing box (Ref. No. 2181753)
1 pc. pressure roller HELIO (Ref. No. 8301192)
1 pc. accumulator MENZEL (Ref. No. 950226), for textile and foil goods 

1 pc. testing machine USTER 1 B (Ref. No. 5231467) with USTER Data processor,
spectograph,, imperfection indicator, power unit, compressed air, cone roving stand

1 pc. Uster Tester 1 B USTER Spectograph (Ref. No. 5231724)
imperfection indicator, power control unit, air valve, sliver and cone stand

1 pc. strength tester USTER (Ref. No. 5231725)
autofeed, 2 carriages, paper, pens, 2 sets pegs, calibration kit

1 pc. textile laboratory (Ref. No. 5232477), large lot of pre-owned machinery
for research and testing of yarn processing, carpet yarn and tufting, dying and finishing, fabric forming etc.

1 pc. vacuum forming machine KOCH (Ref. No. 95019) type KB 25.45, 
10 pcs. Blister packing machines FASSBIND, LUDWIG + CO. type BL 16

1  pc. opening and filling machine LAROCHE (Ref. No. 8302351)
for synthetical fibers, consisting of: feeder, fibre opener 500 mm, blower, fibre storage

1 pc. hydraul. large size cutting press SCHÖN (Ref. No. 5202824)
punching power 130 Mp (1300 kN), useable table size 2.100 x 1.050 mm

1 pc. packing line (Euromat) (Ref. No. 5192825)
for automatic packing of carpet tiles into corrugated cardboard trays
consisting of: Tray Upender, cycle chain, tile packing station, format suspender
cover strap closing device, conveyor system

1 pc. blanket calander (band calander) BATES (Ref. No. 7112863)
1 pc. carding machine FOR Minicard (Ref. No. 2131990)
16 pcs. gripper weaving machine SAURER Versamat 2G (Ref. No. 4122624)
1 pc. CARATSCH (Ref. No. 7142622) with STORK CT-IV coating head, steel band
1 pc. multi needle quilting machine MECA Techna 75 (Ref. No. 5152789)
1 pc. coating line TEXICON AUTOFOAM (Ref. No. 714262-N) type C 756, with foam mixer
1 pc. Voltex machine (Ref. No. 516670-N)
1 pc. backing line for pre coat and carpet glueing IMAC + FLEISSNER (Ref. No. 7141373)
1 pc. cutting machine WISSNER SM 35/320 (Ref. No. 5142058)
1 pc. inspection machine MONFORTS MWE 2/D (Ref. No. 5172054)
1 pc. inspection machine MASCHINENBAU MENGEN GMÖHLING PS 77 (Ref. No. 5172060)
1 pc. foil packing machine for clothes PAVEL (Ref. No. 5192055)
1 pc. band saw KURIS RBS 300 E (Ref. No. 5142056)
1 pc. ironing press H. MEYER RPS-C 1000 (Ref. No. 8302059)
1 pc. wind up HUNTER (Ref. No. 5112809) 20 foot
1 pc. winding machine GILBOS AW 2000 Automatic Winder (Ref. No. 3191734)
1 pc. air conditioning unit LUWA (Ref. No. 2302513)
1 pc. Stenter frame ARTOS / FAMATEX BTM 5300 (Ref. No. 712707-N) pin chain

1 pc. weaving loom VAN DE WIELE CRM 72 (Ref. No. 4162899)
with 3 Jacquards with capacity of 4080 solenoids each. Capacity up
to reed density 373 in 8 coulors is possible, harness is  installed on reed density 340

1 pc. warping machine KARL MAYER DSN 21/30 (Ref. No. 4172271) 
yarn accumulator type GS 30-8

1 pc. fiber reclaiming machine GARNETT BYWATER FP2 (Ref. No. 111102-N) 
with recently installed dust extraction unit, with optional 15" wide rotary cutter

2  pcs. carding sets BEFAMA CS 511/2200 (Ref. No. 2131377)
Machines are designed for semi-worsted system but taking off the can coilers
we can consider them as non-woven carding sets

1 pc. thermobonding oven (sieve drum dryer) FLEISSNER OMEGA (Ref. No. 7132401)
2500 mm perforated working width, sieve drum 1895 mm diameter
diameter of entry drum 700 mm (suction drum), diameter of exit drum 700 mm (cooling drum)

1 pc. random carding line FEHRER V 21 K 12 (Ref. No. 213184-N)

1 pc. PP staple fiber production line (compact fiber spinning line) (Ref. No. 3232212)
for OO staple fibers, 40 mm length, 1.5-6 denier, elongation 300-350 %
strength 1.5-1.8 cN/d'tex, finish 0.4-0.6 %, MFR 11-28

1 pc. Mixmaster (Ref. No. 1132710)
1 pc. square meter measuring device LIPPKE (Ref. No. 5231531)
2 pcs. square meter measuring devices LIPPKE (Ref. No. 5231589)

1 pc. nonwoven line (Ref. No. 2112711)
fine opener made in 1975 with feeding tower, ventilators, chute feeder
carding machine FOR double tambour, cross lapper ASSELIN, drum tacker ASSELIN 
ASSELIN needle loom single board down stroke, (eventually incl. edge trim opener and edge cutter)
turning table, ASSELIN finish needle loom type 767,  unwinding station, winder MENZEL 

18 pcs. draw texturizing machines TEIJIN SELKI HTS 1500 (Ref. No. 3232487)
Friction Texturizing Units, Automatic Doffing, Double Heaters

1 pc. complete space dye line (Ref. No. 7231925)
16 pcs. KRENZLER machines incl. creel with each two circular knitting heads and autom. winder, 
printing roller: pairs of rollers, fleece print possible, KÜSTERS foulard, for dyeing the knit tubes, rubbered rollers, squeezing effect, printing device, vertical, winding unit GILBOS machines with cross wind technique, per unit 6 winding heads, totally 50 heads

1 pc. structuring needle loom ASSELIN SDB-41 (Ref. No. 2212567)
suitable for boucles, velours and various patterns, suitable for PA, PS and PP

1 pc. BCF extrusion plant NEUMAG (Ref. No. 3232804)
-Extruder Type: RT121-1-50-25, -Screw Dia: 50mm, -spinneret: Trilobol.
-
1 pc. gripper weaving machine DORNIER HTV1/E (Ref. No. 4112644), also for glas fibre
1 pc. needle loom DILO VA/25 (Ref. No. 2212839)
1 pc. multi opener TEMAFA (Ref. No. 1122309)

Parts for building up an airlaid nonwoven line (Ref. No. 2132757)
Condensor, Airlay Web head, longit. cutting device with exit belt and ventilator.
Box Feeder with walking platform. The feeder comes with following drives:
entry roller - frequency controller, beater roller - direct, feeding conveyor - frequency controller
re-strip roller - frequency controller, stripper roller - frequency controller, chute feeder - frequency controller, exit belt - frequency controller, feeding belt - frequency controller

1  pc. carding line FOR MINICARD (Ref. No. 2132366)
complete with hopper feeder and lapper with lay down table
entry and take-off with Servo-drives, the FOR hopper feeder is fit with a digital scale
Fibre feeding by wander feeder and chute feeder, Web take-off by FOR Hacker, 
with LESTI camelback type lapper

1 pc. carding machine SPINNBAU (Ref. No. 2132336), Wander feeder  chute feed, edge suction
FOR Hacker, camelback lapper LESTI, lattice band 2200 mm, lapper drive BBC AC drive

1 pc. tufting machine TUFTCO (Ref. No. 6132721)
1/8" super velvet loop, (suitable for velours and loop pile)
including inspection creel, winder, unwinder, mending gun

1 pc. needle loom HUNTER (Ref. No. 2202163)
double punch twin head machine, 300 mm width for use in laboratory etc.

1 pc. gripper weaving machine DORNIER GTVM/E (Ref. No. 4112645)
also suitable for glas fiber material

21 pcs. air jet weaving looms TOYODA Jaif-190 D + Jaif 190 T (Ref. No. 4141186)
also available: 2 pcs. Warp tie machines TITAN, 1 pc. measuring machine
3 pcs. air compressor ATLAS COPCO, 25 pcs. empty beams 

1 pc. reverse winder STAHLKONTOR (Ref. No. 5111191) with autom. cutting device

1 pc. bleached cotton hygienic plant (Ref. No. 2122398)
complete plant for bleached cotton to make zig zag bags, cotton balls bags, cotton bads and cotton sliver for ear cleaners, consisting of: bleaching kier 2 units, oven, picker cards, zig zag machines, balls machines, pad cutting machine, cotton rolling machine

1 pc. blowing line (Ref. No. 1132613), Blend conveyor,  Hunter blend picker, (feed rolls), D106 separator, Ducting, fan and dust collector, 1 Hunter feed box with Wise blower and nozzle

1 pc. line for production of thermal bonded insulator pads (Ref. No. 2122610)
Feeding, Dust plant and waste handling, Fibre processing, Needleloom, Infra Red heater unit, Edge Trim Slitter, Edge Trim Picker, Cut off equipment, Baler, scale

1 pc. drawing frame SCHLUMBERGER GC 12 (Ref. No. 3141026)
1 pc. plastic cone recycling machine (Ref. No. 3302340) including a small baler
1 pc. tufting machine SINGER (Ref. No. 6131324), 5/32" gauge, loop pile
4 pcs. winders DSW 350 (Ref. No. 3191415)
1 pc. regenerative air burning installation (Ref. No. 8302174)
3 pcs. winders GILBOS IDDAC 10 (Ref. No. 3192195) for use after heatset installation

1 pc. warping machine ZELL (Ref. No. 4172357)
with SCHLAFHORST creel Z 24 2492X / gauge 270 mm, with knoting creel

1 pc. Rotor Spinning Plant (Ref. No. 3112444)
- 33 pcs. carding machines RIETER C 1/2, - 33 pcs. USTER card control
- 1 pc. carding machine TRÜTZSCHLER DK 803, - 1 pc. changer TRÜTZSCHLER KH 950/1000 
8 pcs. flock feeders RIETER A 7/1 and A 7/2, 6 pcs. cleaners TRÜTZSCHLER / RIETER and HERGETH, 4 pcs. feeding twoers TRÜTZSCHLER, 1 pc. fiber separator LOPTEX Sorter
1 pc. control device for cleaners / feeding towers, 6 pcs. fibre blenders HERGETH / RIETER,
25 pcs. condensors TRÜTZSCHLER LVS + HERGETH, 3 pcs. TRÜTZSCHLER Blendomat BDT 018 
1 pc. filter unit with Jetfilter PRÖTT, 6 pcs. waste bale breakers HERGET, 8 pcs. draw frames
RIETER SB 51 + RSB 51, some are with paraffiner, 6 pcs. SCHLAFHORST Autocoro SE 9 + SE 8 / SUESSEN 

2 pcs. Autoconers SCHLAFHORST (Ref. No. 3202367), year of construction 1974 + 1976
1 Machine Autoconer 107, 10 places Cops-Magazine, 30 places S-Aufseckung X-XSp.
1 Splicer, 3 Knoter, length measuring device, 1 Machine Autoconer 107, 40 places V-magazine
2 splicer, 2 knoter, length measuring device,both machines are with Uster-Cleaner

1 pc. warping and beaming machine SCHLAFHORST DS B (Ref. No. 417904)
with BENNINGER creel GAAS for 600 cones, full warper ( no sectional warper)

1 pc. conus warping machine ATELIERS DE BELMONT type M90 (Ref. No. 4172106)
including warping creel HACOBA type 65-551

1 pc. high pressure steam generator (Ref. No. 830909-N)
1 pc. storage system (Ref. No. 519908-N) with lifting device for palettes or boxes
1 pc. 8 station switch track system (Ref. No. 8301503) with both header and footer buffers
1 pc. blender (Ref. No. 1132321) including extraction vent at top, 1 x agitator shaft, 4 propellers
1 pc. blender (Ref. No. 1132322) including extraction vent at top, 2 x agitator shafts, 5 propellers

1 pc. high frequency drying machine RADNYE / FASTRAN PA G60 Cool Dry (Ref. No. 7131738)
suitable for drying natural and synth. yarn, yarn cones etc.

1 pc. automatic washing machine (Ref. No. 7222323)
washing drum, pipe, motor, outlet pipe, including: intake/extraction pipework

1 pc. sorter (Ref. No. 1132326)
intake/extraction pipework, 3 bagging boxes, with dust pipes, dust bags, Silo

1 pc. dust control equipment DCE UMA 102 G1 AD (Ref. No. 1131416)
1 pc. mechan. testing machine (Ref. No. 5231965) to test ultimate elongation and strength
1 pc. bale press LINDEMANN ELSOG (Ref. No. 1152570)

1 pc. tufting machine TUFTCO High Speed (Ref. No. 6132273)
cut pile, 1/8" gauge, straight needle bar, modular gauge parts

6 pcs. weaving machines SULZER TW 11 (Ref. No. 4112687)
3 machines type TW 11 75 VSD 125 KT
2 machines type TW 11 85 ZSC 10E 105
1 machine type TW 11 85 ES 105 E10

3 pcs. winding machines EVILO Pro-Winder Automatic (Ref. No. 3192733)
1 pc. centrifuge SCHOLL (Ref. No. 722445-N) type RZ8

1 pc. friction spinning machine FEHRER DREF 2 (Ref. No. 3162375)
roller coating re-newed, second filament feeding, 10" re-winding SCHWEITER conical

1 pc. thermobonding line (Ref. No. 2121867) with 2 carding machines

1 pc. wadding line (Ref. No. 2122239)
- fibre opener DELL'ORCO,  carding machine FOR Minicard,  cross lapper AUTOMATEX 
- needle loom DILO, - 2 spray chambers DUATEX, - dryer DUATEX,  winder/slitter
- incl. Megatron pressing unit with belt, incl. compression unit to reduce volume for transport

1 pc. embroidery machine SAURER 2040 (Ref. No. 8122383)
21 yards embroidery length, 4.430 mm machine height
1 pc. embroidery machine SAURER 2040 (Ref. No. 8122382)
15,5 yards embroidery length, 4.480 mm machine height
with accessories, such like PERFEKTA AW 1012, lifting device, cone holder, shuttles etc.

1 pc. carding machine HDB (Ref. No. 3132741)
176 ends, 4 passages with flexible card clothing, motor with inverter drives

1 pc. rotary interfolder  DESIGN 48 (Ref. No. 8301294)
for interfolded wipers,  with double edge crimp and double drag type unwind

3 pcs. winding machines KARL MAYER (Ref. No. 3192734)
1 machine type RC 5R 1U, 1 machine type RC 8R 1U, 1 machine type RC 10R 1U

1 pc. bleaching/washing line KÜSTERS / BENNINGER / MENZEL / GOLLER (Ref. No. 7152579)
- entry with BIANCO device and E+L KF 10 material guidance and tension device
- MENZEL winch with double entry 30 m content as pre washing station, - squeezing unit
- bleaching bath device FLEX-NIP, - steamer for steam 102 C made by KÜSTERS
- squeezer BENNINGER, - 5 roller winches for washing made by BENNINGER 
with 4 intermediate squeezers and final squeezer, - winder made by BENNINGER or feeding to impregnation device for optical bleacher BENNINGER, - squeezer, - cylinder dryer GOLLER
- hydraulic winder MENZEL, The line includes a fully automatic bleaching bath dosage unit

1 pc. weaving machine VAN DE WIELE MPS (Ref. No. 4162727)
reed 1074 on 1.650 mm, 5 cor, pre feeder ROY
Jacquard: STÄUBLI CR 720, 2 x 2688 hooks (1995)
Jacquard electronic by TAKEMURA in 2004, incl. winder

6 pcs. unwind stands ELANTIC (Ref. No. 5111298)

4 pcs. Axminster weaving machines (Ref. No. 4162765)
stage 4 A/7 pitch extended (276), equipped with TAKEMURA Jacquards

1 pc. re-winder  (Ref. No. 5111706)
5 pcs. double head circular knitting machines KRENZLER (Ref. No. 8132242)
5 pcs. circular knitting machines KRENZLER (Ref. No. 8132243), second-hand

1 pc. calander KÜSTERS type 212 (Ref. No. 7112685)

1 pc. complete extrusion line LENZING (Ref. No. 323650-N), second-hand
for production of PP-tape, including: Extruder LENZING

1 pc. second-hand tufting machine PICKERING Autotuft (Ref. No. 6122348). second-hand
1000 mm working width, velours, RH, with creel, 3/16" gauge

2 pcs. semi worsted carding machines KRUPP (Ref. No. 3131505), 2-swift machines
5  pcs. warping machines COMET + MARZOLI (Ref. No. 4171813), with waxing device
1 pc. tandem raising machine Franz MÜLLER PRPC 32L (Ref. No. 7211809), used

3 pcs. woollen cards HDB (Ref. No. 3131806), second-hand
double doffer woolen card with hopper double swift, double doffer scotchfeed and coiler

1 pc. tufting machine COBBLE ST 83 (Ref. No. 6122343), second-hand
inclusive creel, with Tuftstop Device

1 pc. tufting machine COBBLE ST 85 (Ref. No. 6122344), used
with Tuftstop device, inclusive creel

1 pc. PU foaming line DESMA PUR (Ref. No. 7141110), second-hand
with rotary table, injection unit (spraying device), control cabinet, circulating cooling unit
temperature control 2 pcs., cooling unit, compressor, heating cabinet, paternoster (store lift)

1 pc. foam applicator (Ref. No. 714941-N), second-hand
for coating carpet backings

1 pc. fiber pilot plant (Ref. No. 5231846), second hand

1 pc. needle loom DILO NFZ (Ref. No. 2151787), used
down stroke, new bed and stripper plate, draw roll

1 pc. second-hand air dryer VTM 2600 GL (Ref. No. 7131728)
together with 1 x Air Compressor Atlas Copco, GR1520W , water cooled (328 l/s FAD)
1 x Compressed Air Tank, 5m³, working pressure 16 bar, test pressure 21 bar

1 pc. small quilting production (Ref. No. 5151236)
1 pc. quilting machine STEPPEX High Speed 59" quilting width
1 pc. quilting machine STEPPEX High Speed SA-4 64" quilting width
mechanical multi needle quilting machines with 2 needle bars and cam gear
1 electr. wind up unit, 1 PFAFF freearm sewing machine, 1 laying table 3.500 mm

1 pc. grinding machine TEXTIMA VTC 1 (Ref. No. 721890-N)
incl. exhausting line, incl. 6 spare rollers, without winding equipment

8 pcs. semi warp beam for SULZER 213" SCHOLZE (Ref. No. 4301174)

9 pcs warp beams for DORNIER machines (Ref. No. 4301173)
for WMN 340 as well as 1 pc. warp beam for DORNIER for WMN 360

1 pc. 3-floor jet dryer DORNIER DU/3/5/2400 S (Ref. No. 7131938)
with direct gas heating, 5 Three-Floor-Fields

3 pcs. single doffer carding machines MASIAS (Ref. No. 2131991)
with 3 pcs. Lappers of 2.900/3.000 mm lay down width and 1 lay down table

1 pc. ring spinning + winding machines and Open End Machine
ZINSER + SCHLAFHORST AUTOCORO (Ref. No. 3112601)

1 pc. tumbler PASSAT (Ref. No. 713456-N)
1 pc. tearing line ROLANDO (Ref. No. 1111970), 5 tambours

2 pcs. twisting machines MEMMINGEN (Ref. No. 3172167)
6 pins simple twist, reel size 300 x 200, bobbins + change wheels not included

1 pc. tufting machine SOUTHERN (Ref. No. 6132581)
cut pile 5/32", with shifting needle bar
staggered needle bar, dial adjust on needle bed
air brakes on needle bar for instant stop, SOUTHERN cutting attachments
includes mending frame, inspection platform, and carpet roll up

1 pc. tufting machine SOUTHERN (Ref. No. 6132583)

1 pc. dust ventilator PRÖTT (Ref. No. 2301166)
3 pcs. sieve drum filters TRÜTZSCHLER SFS 120 (Ref. No. 2301167)
3 pcs. dust ventilators TVK 650 (Ref. No. 2301168)
1 pc. spare drum filter (Ref. No. 2301169)
suitable for TRÜTZSCHLER sieve drum filter SFS 120

1 pc. texturizing machines BARMAG FK6-600 (Ref. No. 3231321)
First heater steam heated, Second heater Diphyl, type 6 devices

1 pc. paternoster for warp beams HUBTEX KLST-H 4 (Ref. No. 4301304)
micro processor controlled choice of individual beams

1 pc. carding machine  (Ref. No. 2131140)
consisting of: tambour, take-off, volant, worker (3 pcs.)/turner, conveyor roller
pre teaser, entry, entry belt, hacker

1 pc. precision cross winding machine SCHÄRER Pineapple (Ref. No. 319694-N) type PAH, 
for winding of fully synthetic endless yarns, synthetically silk etc., also suitable for staple fibre yarns, for production of cross cones with precision winding 56 mm diameter

1 pc. flexo printing machine POLYTYPE (Ref. No. 7171526)
1 pc. pressing unit FAW (Ref. No. 8301527)
1 pc. box feeder FOR (Ref. No. 1141540)
2 pcs. cross lappers LESTI (Ref. No. 2141544)
1 pc. squeezer (Ref. No. 8301546)
3 pcs. re-winders  (Ref. No. 5111580)
1 pc. unwinder  (Ref. No. 5111605) simple machine with slide and dancer
1 pc. Feeder HOLLINGSWORTH (Ref. No. 1141610)
3 pcs. lappers LESTI (Ref. No. 2141613)
1 pc. unwinder CAMPEN (Ref. No. 5111633) with welding unit
1 pc. impregnation device  (Ref. No. 7141699) foam applicator with servo drive
1 pc. magnet for metal detection (Ref. No. 2301682) suitable also for medical products
1 pc. dust cabin  (Ref. No. 1131782)
1 pc. pressing unit with two steel rollers PAUL STEHNING (Ref. No. 7111922)
1 pc. sewing machine DOHLE 721/924 (Ref. No. 5211961)
1 pc. sacking device PRÖTT (Ref. No. 1301596)
1 pc. air compressors ATLAS COPCO GR1120W (Ref. No. 8301727)

1 pc. humidifier line AXAIR AG AF-S1 Air Fog (Ref. No. 2301921)
The humidification system works on injector principle. The air pressure pass the jets and makes an underpressure therewith. The vacuum valve controls the passing water quantity. By underpressure the jet sucks the water from the water feeding and sprays the water to finest aerosole. The humidifier capacity is depending from adjustable air pressure and the passing water quantity on the vacuum valve.

1 pc. 4-roller expander (banana rolls) (Ref. No. 2301916)

1 pc. lot (remaining stock) felting needles (Ref. No. 8321911)
in detail as follows:
14.500 pcs. 15 x 18 x 43 x 3 made by Rockwell International Draper-Erin Ltd. Ireland (blue)
61.000 pcs. 15 x 18 x 34 x 3 made by SNF (Singer) (brown)
40.000 pcs. 15 x 18 x 34 as above

1 pc. wind up unit (Ref. No. 5111857)
wind up roller 2100 mm, diameter 400 mm, rubbered steel roller
hydraul. operated re-wind arm, variable adjustable, dancer for tension control

1 pc. roll packing machine HAGEMANN (Ref. No. 5191736)
Packing Material Natron paper 70 to 80 grams/sqm, autom. paper glueing by hot glue
autom. palette loading by roboter arm

1 pc. Shredder (Ref. No. 1111739)
The shredder consists of 3 sections: 1.) Lifting Device for boxes with weight measuring unit
2.) Shredder, 3.) Conveyor to transport the material

1 pc. intermediate tunnel HERGETH (Ref. No. 2301708)
for use after fine opener for quality improvement

1 pc. rewinding/inspection machine CAMPEN (Ref. No. 5171663)
with dancer, center winder, contact drive

1 pc. air conditioning unit EISENHOFER (Ref. No. 8302269)
suitable for carding rooms and similar, complete with air condensor

1 pc. square meter weight measuring device LFE (Ref. No. 5222010)
radiator = Krypton 85

1 pc. re-winder / inspection machine CAMPEN (Ref. No. 5111635)
with dancer, center winder, contact drive, GS-technic

1 pc. inspection table CAMPEN (Ref. No. 5171634)
with accumulator, scissor's cut unit, paper sleeve winder

1 pc. unwinder with welding device CAMPEN (Ref. No. 5111633)
welding unit made by JOISTEN + KETTENBAUM type G0-2,0-60

3 pcs. re-winders Ref. No. 5111604) hydraul.-pneumatic, with edge straightener
accumulator band dancer

1 pc. cutting unit  (Ref. No. 5141603)
steel roller with squeezing blade, together with edge trim suction PRÖTT

1 pc. cutting unit  (Ref. No. 5141551)
steel roller with scissors cut, together with edge trim suction PRÖTT

pc. fiber reclamation machinery (Ref. No. 1112107)
for recycling Polypropylene carpet yarn (BCF)
for use in automotive felts, mattress pads, underfelt and needlefelt carpet
1) Garnett Bywater FP1 fibre opening machine with extended hoppers and photocells
2) Two Walker and Smith 30"/ 750 mm rotary cutting machines with connecting conveyor for double cutting at 90 degrees .
3) 200 t fully hydraulic swivel box bale press- Ken Mills
4) 13" Conveyor fans
5) Two Goring Kerr metal detectors

1 pc. winder  (Ref. No. 5111525) with cutting roller and squeezing blade
3  pcs. High Pressure Pumps BURDOSA (Ref. No. 8301524)
1 pc. dust extraction PRÖTT (Ref. No. 2301523), with fibre back feeding to box feeder
4 pcs. Camelback lappers (Ref. No. 2141522)
4 pcs. nonwoven cards FOR Minicard (Ref. No. 2131521), suction for workers
1 pc. winder EDELMANN (Ref. No. 5111438) with roller accumulator, centerless

1 pc. pressing unit  (Ref. No. 8301437)
1 pc. spraying device CHARVO (Ref. No. 7141435), no ring system but crossbar
4 pcs. box feeders FOR (Ref. No. 1141427)
1 pc. 3-floor jet dryer DORNIER (Ref. No. 7131433), 3 zones, sieve band 

1 set of strong rollers for high tension forces (Ref. No. 5112121)
1 pc. 3-head slitter JUDDELSHON (Ref. No. 5142061)
1 pc. grip roll MENZEL (Ref. No. 5112120)
1 pc. mixing tanks (Ref. No. 7142160)

5 pcs. intermediate chute including blower (Ref. No. 2302041)
for use after fine opener to improve quality

1 pc. calender RAMISCH KLEINEWEFERS (Ref. No. 7112037)
2 pcs. guide frame ERHARDT + LEIMER DR 7031 (Ref. No. 2302026)
1 pc. winding station MENZEL (Ref. No. 5112035)
1 pc. heat sealer VERTROD 96EWBLP (Ref. No. 5192018)
2 pcs. hopper feeder (Ref. No. 1142021)
1 pc. hopper feeder FOR (Ref. No. 1142022)
1 pc. tensile machine (Ref. No. 5232028)
1 pc. hoist BUDGIT (Ref. No. 5192029)
1 pc. fine opener (Ref. No. 1122030)
2 pcs. emptying blenders TEMAFA (Ref. No. 1132032)
1 pc. hopper feeder FOR (Ref. No. 1142034), including TEMAFA Feed Stack

5 pcs. cotton cards WITHIN (Ref. No. 2132023)
single doffer machines, with HOLLINGSWORTH cardmaster plates, HOLLINGSWORTH chute feed

1 pc. welding machine KIEFEL KHH 10 /30 00 SD (Ref. No. 8302017)
Operation: - Four (4) different tools can be used at each station if the tools are engineered in a clamshell configuration, whereby the bottom tool has to be electrically preheated.
- The power to the preheated tool has to be shut off when the RF is applied during the welding process. - During the RF cycle, the entire tool table is lifted out of its position upward against the RF head or stationary top tool. - Based on the program used, each tool table can be processed by means of different hydraulic forces. - Since the bottom rotating tools need to be heated and heat controlled, a rotating power source has to be installed at the center of the table.

1 pc. nonwoven line THIBEAU / ASSELIN (Ref. No. 2112723)
carding machine THIBEAU 2.000 mm, with cross lapper ASSELIN 2.600 mm lay down

1 pc. bale opener TRÜTZSCHLER (Ref. No. 1122726)

1 pc. nonwoven line THIBEAU / ASSELIN (Ref. No. 2112724)
carding machine THIBEAU 2.000 mm, with cross lapper ASSELIN 2.600 mm lay down

1 pc. Nonwoven line THIBEAU / ASSELIN (Ref. No. 2112725)
carding machine THIBEAU 2.000 mm, with cross lapper ASSELIN 3.200 mm lay down

9 pcs. airjet weaving machines SULZER LU5100 - MS (Ref. No. 4142362)
1 pc. tufting knife grinding machine AUTOOL Grinders (Ref. No. 6141162)

1 pc. clothing manufacturing plant (Ref. No. 5212705)
consisting of various different sewing machines and cutting machines

1 pc. foreign fiber detecting machine TATSUMI (Ref. No. 1131649)
1 pc. roll reverse winder BRIEM (Ref. No. 511545-N)
1 pc. fringing machine UNION SPECIAL (Ref. No. 521693-N)
i4 pcs. carpet weaving machines VAN DE WIELE ALL 60 (Ref. No. 416254-N)
1 pc. cutting press VEB Leipzig POLYGRAPH C 120 FHZ (Ref. No. 520800-N)
1 pc. evenness testing machine USTER GGP (Ref. No. 5231469)
1 pc. sectional warper HACOBA USK 1000e (Ref. No. 4172338)

1 pc. complete blanket production line (Ref. No. 8111918) for production of blankets
and/or pile fabrics, consisting of spinning mill, tufting line, dyeing mill,
finishing and raising machines, make up

16  pcs. draw texturising machines BARMAK FK6-M700 (Ref. No. 3232479)
Friction Texturizing Units, Manual Doffing, Double Beaters

1 pc. foil packing machine with shrinking tunnel KARL KLEIN APPARATEBAU EEG 18-50 (Ref. No. 519960-N)
with integrated shrinking tunnel and CYKLOP strap packer
with welding machine to weld the ends of the straps

1 pc. line for the production of resin impregnated insulator pads (Ref. No. 2122609)
consisting of: Feeding, Fibre processing, Dust plant, Needleloom, Slitter, Resin application, 
Dryer, Cooling Zone, Slitter

1 pc. winding machine GILBOS PLS 8 (Ref. No. 3191289) 
knock-off system (warp protector tension control)

1 pc. lamination machine with powder scatterer VAN KLEVERICK (Ref. No. 7142544)
silicon band, incl. separate powder scatterer

1 pc. gripper weaving machine GÜNNE (Ref. No. 4131745)
suitable for colour change 8 weft colours and device for taking 3 warp beams
with STÄUBLI Jacquard machine CF 420 made in 1989

1 pc. sample carding machine (Ref. No. 5232337), single cylinder, flexible card wire,

1 pc. JOHNSON LEESONA tape line with SAHM winders (Ref. No. 3231721)
41/2" Johnson Leesona Extrusion line made in 1968 with 112 Sahm winders, 230 GE made in 1993

1 pc. winder (Ref. No. 5112175) 130 " working width, speed 100 m/min
1 pc. hydraulic winding station (Ref. No. 5112025) 126 " working width, with material accumulator

1 pc. winder SUPERBA BLA (Ref. No. 3192193)
30 threads, for use after heatset installation, for conical cops

10 pcs. accumulators SUPERBA AM (Ref. No. 8302194)

1 pc. quilting machine MECA Convert (Ref. No. 5152405)
lock stitch high speed quilting machine suitable for any patterns

1 pc. tight bander KIENER SK 450 (Ref. No. 5191249)
1 pc. bander SENNING 522 SE/U/V (Ref. No. 5191250)
1 pc. bander CASSOLI PAC 500 (Ref. No. 5191717)

1 pc. tight bander MEURER CM / SB 60 (Ref. No. 5191226)
infeed parallel to the sealing bar with pusher

1 pc. core winder PCMC (Ref. No. 8301212)
core diameter flexible max. 60 mm, core length flexible did 2,6 m, paper feed speed 60 m/min

1 pc. cross cone winder SAVIO RAS 15 L (Ref. No. 3191972)
8 place round magazine cross cone up to 120 mm
Koter for Fisherman's Knots, mechanical yarn cleaner

1 pc. cross cone winding machine SAVIO RAS 15 L (Ref. No. 3191973)
exit cops 200-300 mm L, Koter for Fisherman's Knots
Yarn Cleaner USTER-Automatik, Modell D, measuring head MK 20, wander blower

1 pc. heat/cool mixer MTI M 750/K2400 (Ref. No. 8301190)
1 pc. bale opener DILO BOE (Ref. No. 1122331), suitable for jute, 3.000 mm length
1 pc. needle loom ASSELIN (Ref. No. 2152368)
1 pc. needle loom BYWATER KBN (Ref. No. 2152328)
1 pc. needle loom BYWATER KBN (Ref. No. 2152329)
1 pc. needle loom (Ref. No. 2152330)
1 pc. drum tacker ASSELIN 169 (Ref. No. 2172332)
1 pc. web drafter DILO VE 4-50 (Ref. No. 2301234), 4 drafting zones
1 pc. spreader SABER (Ref. No. 8302542)
1 pc. transfer calander (Ref. No. 7111947)
1 pc. washing machine KÜSTERS (Ref. No. 7221630)
1 pc. LIBA Copcentra 4 (Ref. No. 8301963)
2 pcs. embroidery machines SAURER 2040 (Ref. No. 8121245)

1 pc. roller cutting press DIAMAT (Ref. No. 5201643)
2500 mm pass through year of construction approx. 1989, 10 tables for preparation

1 pc. laminating line (self-made) (Ref. No. 714166-N)
 incl. roller and reroller, pressing roller, exhausting device and jets

1 pc. tube filter set TEMAFA (Ref. No. 1131507), number of tube filters: 15 pcs.
filter area = approx. 2 sqm, air pass through = approx. 43 000 sqm/h

1 lot second-hand fiber preparation machinery, (Ref. No. 1131945)
- suction ventilator TRÜTZSCHLER made 1975
- warm air device AL-KO made in 1995
- burner JUNKERS made in 1995
- cutting mill ALPINE made in 1994
- condensor TRÜTZSCHLER made in 1975
- vacuum unit (pump) JUNGBAUER made in 1989
- filter SF 123 TRÜTZSCHLER made in 1984
- fine filter SF 124 TRÜTZSCHLER made in 1985
- flock feeder FBK TRÜTZSCHLER made in 1975
- feeding tower with feeding device TRÜTZSCHLER made 1979

2 pcs. feeders with feeding towers TRÜTZSCHLER (Ref. No. 1141882)
6 pcs. flock feeders TRÜTZSCHLER FBK (Ref. No. 1141881)

1 pc. fine filter TRÜTZSCHLER SF 124 (Ref. No. 1131880)
1 pc. filter TRÜTZSCHLER SF 123 (Ref. No. 1131879)

1 pc. metal detector BOEKELS (Ref. No. 1301758)
1 pc. air separator TEMAFA (Ref. No. 2301861)
3 pcs. condensors TRÜTZSCHLER (Ref. No. 2301878)
1 pc. suction ventilator TRÜTZSCHLER (Ref. No. 2301877)
1 pc. heavy part separator TRÜTZSCHLER (Ref. No. 2301876)
1 pc. cutter PIERRET CT 60 (Ref. No. 5142717)
1 pc. multi pass pin tenter dryer HUNTER (Ref. No. 7122467)
1 pc. padder RAMISCH KLEINEWEFERS (Ref. No. 7112466)
1 pc. doubler FADIS (Italy) Model FA/B (Ref. No. 3192464)
1 pc. twisting machine SAURER ALLMA TM 220B (Ref. No. 3172463)
1 pc. bale press (Ref. No. 1152360)
1 pc. A-frame winder MENZEL 72SB (Ref. No. 5112473)
1 pc. rolling and wrapping machine ATF (Italy) STAR 1000 (Ref. No. 5192474)
1 pc. A-frame winder MENZEL 90SB (Ref. No. 5112475)
2 pcs. oil hydraul. center winders BASTIAN (Ref. No. 5112187)
2 pcs. oil hydraul. center winders MENZEL (Ref. No. 5112188)
1 pc. tumbler THIES T-150 (Ref. No. 7131910), bath tumbling, batch size 150 kg
1 pc. winding machine RITE / SAVIO (Ref. No. 3192201)
1 pc. USTER Dynamometer (Ref. No. 523274-N), tension ranges from 0-10, 0-20 and 0-40 %
1 pc. winch (Ref. No. 722352-N), for washing printed material, completely made from NIRO
3 pcs. table scales TOLEDO (Ref. No. 522683-N), measuring range 200 g to 10 kg
1 pc. air jet weaving machine DORNIER (Ref. No. 4142453)
3 pcs. airjet weaving machines ELITEX (Ref. No. 4142454)
1 pc. pressing unit FLEISSNER (Ref. No. 7112718)
1 pc. gripper weaving machine DORNIER GTVM/E (Ref. No. 4112715)
1 pc. MALIMO machine, multiaxial MALIMO 14016/6 (Ref. No. 5162714)
6 pcs. sewing machines JUKI DLN 5410 (Ref. No. 521862-N), with control table CP 360
1 pc. sewing machine DÜRRKOPP 372-105 (Ref. No. 521791-N)
1 pc. scale electron. SARTORIUS (Ref. No. 523940-N)

1 pc. Malimo machine made by TEXTIMA 14010 (Ref. No. 5162720)
reconditioned, with frequency controlled drive and interface for chopper

1 pc. quilting machine STEPPEX (Ref. No. 5151008)
1 pc. carpet shearing machine SELLERS Mark 72 (Ref. No. 5242192)

1 pc. Chenille machine GISSE Italy AC 91/4 (Ref. No. 3301909)