1 pc. mechan. cross cutter AUTEFA C 132 (Ref. No. 5143883)
3000 mm working width, year of construction approx. 1990/1996
speed up to 15 m/min, up to 12 cuttings per minute
max. height of web 180 mm, dismantled
guillotine cutter

1 pc. complete used automatic cutting line LECTRA VECTOR 5000 (Ref. No. 5143858)
2200 mm working width, year of construction 2005
with BRIO 55 spreader, spreading tables 140000 mm
Cutter Vector 5000

1 pc. cutting line INVESTRONICA (Ref. No. 5143859)
2000 mm working width, year of construction 1988
with BULLMERWERK spreading machine and table
length 10000 mm
Investcut 3 cutting machine length 10000 mm
total length of cutting line 23000 mm

1 pc. sheeter (Ref. No. 8303831)
60 inches wide

1 pc. slitter BIRCH BROTHERS (Ref. No. 5143833)
200 inches width, complete with 2 un-winds

2 pcs. slitter/winders JUDELSON (Ref. No. 5143834)
56 inches and 74 inches width

1 pc. slitter/rewinder CAMERON (Ref. No. 5142445)
1800 mm working width, year of construction ca. 1975
800 to 1000 mm unwind diameter
ca. 800 mm rewind-diameter
incl. 18 knives
min. distance between the knives are 20 mm
max. production width 1.800 to 1.850 mm

1 pc. paper sleeve cutting machine self made (Ref. No. 5143775)

1 pc. disc slitter CAMCO (Ref. No. 5143748)
52 inches working width

1 pc. fleece cutter (Ref. No. 5143702)
3000 mm working width, year of construction 1995

1 pc. guillotine cutting machine AUTEFA (Ref. No. 5143691)
2200 mm working width, with hydraulic drive
as well as
HAUSER cross cutting unit
with piece counter, cutting length and light control adjustable,
cross cutting machine installed in 1996

1 pc. multi use cutter HUMANTEC (now LECTRA) MFC 270/300CV (Ref. No. 5143674)
cutting field 2700 x 3000 mm, low number of working hours, working hours approx. 100 hours
incl. conveyor set, advance elements, Unibox IF, vacuum pump 2 x 15 kW switching valves
sound absorbing box, activation for switching valves, exit belt and supporting drive
for conveyor transport, high capacity cutting head with Z-axle controlled
tangential- and pen module with drawing knife catridge, Laserpointer
OPTITEX software module PDS and Mark

1 pc. band saw MOESSNER (Ref. No. 5143686)
with NC-axle

1 pc. cutting unit TECHNOPLANTS (Ref. No. 5143623)
4200 mm working width, year of construction 1999, 13 cutting units

1 pc. guillotine cutter / mechan. cross cutter AUTEFA C 132 (Ref. No. 5143547)
800 mm working width, year of construction 1993

1 pc. band cutting machine SISTIG BS-K 650 (Ref. No. 5143104)
year of construction 1984
new motor, cylinder and axle installed in 2003

1 pc. longit. cutting machine / circular blade strip cutter ATM type STS 2 (Ref. No. 5143437)
800 mm working width, year of construction 2004

1 pc. carpet tile cutting machine SELLERS (Ref. No. 5143408)
2000 mm working width, year of construction 1998
working with knifes
previously used for bitumen for the base
production speed is approx. 1.500 rpm/min
can be increased to 2200 rpm/min by changing the spindle

1 pc. roll cutting machine ACELLI (Ref. No. 5143175)
3000 mm working width, year of construction approx. 2003
dismantled and stored in heated container

1 pc. folding and cutting machine for wet wipes WALI 130-NV (Ref. No. 5142932)
year of construction 2002
and also suitable for dry wipes
Machine for the production of nonwoven wet wipes of 400 x 380 mm, folded in 1/4, composed of circular box motion unroller, device for longitudinal folding in V, transverse bed area with exchangeable bending headstock of 400 mm, group of transverse section
by band saw with self-grinding device, counter, runout table and full electrical equipment.

1 pc. textile cutting unit (Ref. No. 5142100)
The line automatically can unroll the fabric and control the selvage so that the textile length also runs correctly.
The machine is able to cut the fabric in choosen widths and the machine can also be programmed to cut the lengths correctly.
Beside the machine has a light table so that the operator has the possibility of controlling the fabric.
Finally the cut parts will be delivered on a handling trolley.
The machine has been dismantled and is stored in a container

1 pc. production line for cleaning sponges BDM Italy type FAR2001 (Ref. No. 5142099)
1800 mm working width
Principle of production:
- 3 coats of foam plastic glued with fibres are passed into the machine from for instance 3 rolls or perhaps as sheets. Max. material width 1800 mm
- The 3 coats are cut horizontally in strips of for instance 70 mm width
- The 3 coats are cut across, producing for instance 3 x 25 sponges
- On the belt conveyor from Pos. 3 to 5 the sponges are set on end changing the base from 7 x 9 cm to about 3 x 9 cm
- The packing machine counts up the sponges (for instance 10 pcs.) and wrap the sponges in foil, in the same way as wrapping cigarette packages in foil.
It is possible to put on a self-adhesive label at the same time.
- The package with 10 pcs. Sponges is lead to Pos. 7 by the belt conveyor.
- Cardboard raiser machine/packing machine
This machine automatically forms a cardboard where you can put 50 x 10 pcs. Packages. The cardboard is automatically sealed.
- Finished cardboard
All operations are done by one person only who produces 800-1000 x 10 pcs. Packages per hour in
the sponge size 7 x 9 x 3 cm per spong.
- Placement of the person who operates the production process.
The machine can work with preprinted foils and is also able to put on labels.

1 pc. cross cutter STUTZNAECKER (Ref. No. 5142843)
3400 mm working width, year of construction 1991
380 V AC, lxwxh = ca. 1.100 x 4.400 x 1.150 mm, weight approx 500 kg

3 pcs. trim absorbers (Ref. No. 2302706)
all including all tubes
2 machines are with sound absorption box and one is without

1 pc. cutter for use on quilting machines (Ref. No. 5142325)
year of construction 2000

1 pc. cutting machine AUTEFA C 132 (Ref. No. 5142085)
3300 mm working width, year of construction 1982
380 V AC, 12 A
presently used for 2.300 mm working width, max. width approx. 3.300 mm
fit with blade for perforation
total length 5.240 mm x 2.100 mm LxW, weight approx. 6 tons

1 pc. hydraul. cross cutter MOHR (Ref. No. 512265-N)
construction year 1989, for perforated and regular cuttings
for up to 5.400 mm width
very good condition
for fleeces up to 2.000 g/sqm

2 pcs. log saws PCMC model 90 (Ref. No. 5141257)

1 pc. cutting unit HAUSER STA (Ref. No. 5141182)
2400 mm material width max. year of construction 1991

1 pc. cutting machine KURIS RBS 300 Berlin (Ref. No. 5141088)
3760 mm knife length year of construction 1991
380 V, 50 cycles, with roller table, as new
suitable for all flexible foams and for textile

Second-Hand Laser Cutting Machines | Water-Jet Cutting Machines
Second-Hand Guillotine and Rotary Cutting Machines for textile waste 
Second-Hand Roll Cutting Machines | Textile Cutters

Second-Hand Tearing Machines | Tearing Lines | Textile Waste Recycling
Second-Hand Punching Machines | Die Cutters | Clicking head cutting

Top of Page

Second-Hand Nonwoven Machines and used textile equipment
Summary of 2nd-hand textile machine categories:

deutsch  english  francais  espanol  nederlands
italiano  svenska  suomi  slovenski  cestina  hrvatski

home english     home deutsch