Second-hand weaving machines, used weaving looms
1 pc. weaving machine SULZER P 7100 (Ref. No. 4115418)
3300 mm working width, year of construction 1996
4 colours
weft feeder IRO Luna M with frame
dobby STÄUBLI 2035
1 pc. weaving machine DORNIER GTVM/E (Ref. No. 4125396)
3300 mm nominal width, year of construction 1985, second-hand
could be supplied with a home-made creel, with winder
1 pc. weaving machine GÜNNE (Ref. No. 4125378)
year of construction 1982
with STÄUBLI + TRUMPELT from 1982
2 pcs. weaving machines DORNIER HTV4/SD (Ref. No. 4115379)
year of construction 1988
with STÄUBLI dobby
1 pc. weaving machine DORNIER HTV8/S (Ref. No. 4115380)
year of construction 1988
4 pcs. velour weaving machines GÜNNE (Ref. No. 4125381)
year of construction 1979
with STÄUBLI dobby from 1979
2 pcs. velour weaving machines SACM-MAV Velours (Ref. No.
4125382)
year of construction 1972
with STÄUBLI dobbies from 1973
2 pcs. velours weaving machines SACM-MAV Velours (Ref. No.
4125383)
year of construction 1973
with STÄUBLI dobbies from 1977 + 1978
1 pc. velour weaving machine GÜSKEN GMV90 (Ref. No. 4125385)
year of construction 1985
with STÄUBLI dobby from 1985
1 pc. high speed narrow fabric weaving machine JAKOB MÜLLER NCE
1/365 (Ref. No. 4125330)
365 mm max. reed width, max. fabric width 340 mm, year of construction
2004, second-hand
This machine is for narrow fabrics as : scarves, towels, strips etc. Raw
materials can be: wool, acrylic yarn, cotton, nylon etc., 4 colours
The machine comes with an IRO weft feeder and 2 stands for 340 coils.
The machine has maximum 200 hours and is in very good condition. The
machine is out of production since 3 years.
5 pcs. weaving looms NUOVO PIGNONE TP 500 (Ref. No. 4125316)
2100 mm working width, year of construction 1977+1977+1979+1979+1980
with dobby, each machine with:
No 2 warp beams + 2 little beams
No 4 weft feeders Magnolfi & Bandini
No 15 Heddle frames with heddles
No 14 reeds
and other articles like air compressor, used engine for loom and varied
card.
1 pc. flat weaving machine DORNIER PTS / 6 S 16 (Ref. No. 4115319)
3200 mm working width, year of construction 2007
dobby STÄUBLI 2670 B
max. warp beam diameter 1000 / 1250 mm
Upper warp beam device
4 pcs. gripper weaving machine DORNIER GWN6/SD (Ref. No. 4125309)
2100 mm working width, year of construction 1986, second-hand
6 colours, max. 10 shafts
shaft machine KAISER 6021
2 pcs. gripper weaving looms DORNIER HTV 8/J (Ref. No. 4115300)
year of construction 1991, second-hand
4 pcs. gripper weaving machines DORNIER HTV 8/S 25 (Ref. No.
4115301)
year of construction 1988 + 1989, second-hand
6 pcs. wide width weaving machines SULZER RÜTI P 7100 (Ref. No.
4115095)
3600 mm working width, year of construction 1988, second-hand
low number of working hours
have been used in 1-shift-production only
4 shafts
14 pcs. circular weaving looms STARLINGER (Ref. No. 4124901)
year of construction 1991, 1992, 1993, 1996, 1998
model HDN8, SL6S and HDN62 with
centre wind roll up or surface drive roll-up
14 pcs. rapier weaving machines DORNIER (Ref. No. 4114904)
17 and 18 shafts, type GWN, HTN, GWB, GNB, GW and GTB
9 pcs. weaving machines for Polypropylene SULZER TW 11 ES 105 E 10
130" (Ref. No. 4114786)
153 inches width single colour, year of construction 1971-1976
cam motion, 1 weft feeder, 2 warp beams flange dia 800 mm
380 V, 50 Hz
4 pcs. weaving looms for polypropylene SULZER P7100 153"
(Ref. No. 4114787)
153 inches working width, year of construction 1990
1 colour, projectile type D1
electronic brake for projectile
control panel, 380 V, 50 Hz
2 pcs. circular weaving looms YT-800F (Ref. No. 4124788)
applicable yarn: PP flat yarn, 4 shuttles
weft insertion speed 150-200 input rpm
density of weft: 8-16 inches
no of warps: 720-800
2 pcs. circular weaving looms YT-1400 (Ref. No. 4124789)
year of construction 1999
applicable yarn: PP flat yarn, 6 shuttles
weft insertion speed 90-100 input rpm
density of weft: 8-16 inches
no of warps: 1180-1280
4 pcs. belts weaving looms LD1 (Ref. No. 4124790)
66 mm width of belt, year of construction 1999
1 pc. gripper weaving machine DORNIER GTN-5 (Ref. No. 4114441)
2200 mm working width, year of construction 1982
3 weft feeder IRO IWF
excenter machine R 20, mechanical, made by KAISER
4400 wires Dreher
frames made by GROB, 10 pcs. available
1 pc. weaving machine RUTI F-2001 (Ref. No. 4114010)
1900 mm nominal width, year of construction 1981,
300 TpM
18 pcs. band weaving machines (Ref. No. 4123788)
2.) band weaving machine MÜLLER-FRICK NB 2/45
3.) band weaving machine MÜLLER-FRICK NB 2/40
4.) band weaving machine MÜLLER-FRICK NB 2/45
6.) band weaving machine MÜLLER-FRICK NB 2/45
11.) band weaving machine MÜLLER-FRICK NFN 53 2/66 velvet band weaving
machine
21.) band weaving machine MÜLLER-FRICK NB 2/45
22.) band weaving machine MÜLLER-FRICK NB 2/40
23.) band weaving machine MÜLLER-FRICK NC 2/80 P velvet band machine
1 pc. needle band weaving machine MAGEBA type SFXII (Ref. No. 4121136)
year of construction 1995
suitable for manufacturing hook bands for velcros
two band of 60 mm each, complete with
11 weaving shafts, 1 meter counter
1 set of reeds, 1 set of spares
1 brake frame, winding device
infrared heating elements for fixing of hook yarn
1 pc. hot cutting device, 1 pc. hook cutting machine
as new, very low number of working hours
2 pcs. looms for bag production STARLINGER LENO-2 (Ref. No. 4123051)
300 - 750 mm working width, year of construction 1995
suitable for production of open-work bags, reticular
Top of Page
Second-hand nonwoven machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski