Textile laboratory machines, second hand strength testers, measuring machines and pilot lines for research and laboratory, sample carding machines, sample needle looms
1 pc. oil thermic bath for sample dyeing SDL / ATLAS Rotadyer (Ref. No. 5235350)
1 pc. constant tension transport L+H CTT-E (Ref. No. 5235340)
for elastomeric yarns/fibers, a load cell
attached to the equipment allows to measure dynamic
tension properties. Also a front feeder is included.
50cN, 100cN and 500 cN load cells, pin friction test,
elastomeric yarn feeder, shrinkage tunnel test, different weights
1 pc. yarn examining machine SDL / ATLAS (Ref. No. 5235341)
rotary board to wind and display yarn threads.
It allows to stablish qualitative comparisons between different yarns
or standardized pictures.
1 pc. circular knitting machine MAYER (Ref. No. 8135342)
This machine is industrial equipment. Model reference is RELANIT.
Mainly used to produce single jersey structure, it can be
switched to other structures due to interchangeable cams system.
With additional cams, different yarn sets for starting-up and testing.
1 pc. winder / Uster detector SAVIO (Ref. No. 5235343)
based on the industrial scale machines, but reduced
to a single position. System to prepare material for
cone dyeing. Attached to the main computer it can
be found the USTER detector control to setup the
yarn cleaning process.
1 pc. electrojet general vacuum system (Ref. No. 1305344)
a big fan surrounded by some filters that catched
dust and other particles in the air. Hangs from the roof.
1 pc. dynamometer TEXTECHNO STATIMAT (Ref. No. 5235345)
specially designed to check tensile properties on yarns. Main feature
is the automatic specimen and sampler changer.
Currently it is used with 1 12N load cell.
1 pc. air-jet covering machine SSM Digicone DP3 (Ref. No.
5235346)
adapted industrial machine with reduced number
of spindles, only 5. It produces tangled yarn at high speed.
1 pc. wrap reel SDL / ATLAS (Ref. No. 5235347)
manual version
4 pcs. tensiometer / tachometer ZIVY-EL-TEN (Ref. No. 5235348)
designed to measure yarn or fiber tensions and speeds
1 pc. yarn crimp tester TAUTEX (Ref. No. 5235349)
2000 mm crimp tester with 1 kg load cell attached
1 pc. fabric static stretch tester for knits CSI 138 K (Ref. No.
5235351)
to perform knit fabrics stretch and growth test
according to ASTM 2594
3 metacrylate dies + weight 4,54 kg
2 pcs. hand tachometer PH1100 + PH-200 (Ref. No. 5235352)
to check and measure speeds
1 pc. tension measuring device ETB500 (Ref. No. 5235322)
0-500 cN, together with 1 airflow meter
1 pc. roller chair testing unit (Ref. No. 5235258)
year of construction approx. 1980, second-hand
2 pcs. HT sample dyeing machines LINITEST + ISAL (Ref. No.
5235248)
1.) Linitest 12 tumbler 200 ml (ALREADY SOLD)
2.) Isal tumbler 12 x 50 ml, 8 x 100 ml, 12 x 200 ml (STILL AVAILABLE)
1 pc. HT-AHIBA Texomat AHIBA (Ref. No. 5235249)
1 pc. Viscojet Labor Jet (Ref. No. 5235250)
90 C, approx. 500 gr
1 pc. pad steam unit MATHIS type PSA/HT (Ref. No. 5235251)
1 pc. colour testing unit OPTRONIK Colorflash C 22S (Ref. No.
5235252)
1 pc. sample dye winch SELF MADE (Ref. No. 5235193)
1500 mm working width, year of construction 1995
steam heated
1 pc. sample dye winch SELF MADE (Ref. No. 5235194)
1000 mm working width, year of construction ?
electr. heated, modernized, new heating installed in approx. 2005
1 pc. strength tester for filament yarn ZWICK (Ref. No. 5235135)
year of construction 2004, second-hand
with computer hardware
METTLER TOLEDO XS - electronic fiber scale
1 pc. Thermohygrograph PARAMOUNT EUROPE 180 (Ref. No. 5235024)
year of construction 2005, second-hand
1 pc. Shirley Stiffness Tester PARAMOUNT EUROPE M003B
(Ref. No. 5235026)
year of construction 2001, second-hand
1 pc. pilling assessment Viewer VERIVIDE PAV (Ref. No. 5235027)
year of construction 2004, second-hand
1 pc. Verivide VERIVIDE CAC 60 (Ref. No. 5235028)
year of construction 2004, second-hand
1 pc. ICI Pilling Box JAMES HEAL Drive System 2 (Ref. No.
5235029)
year of construction 1990
1 pc. Spectrophotometer X-RITE SP64 Portable + QC Software QA
MASTER II (Ref. No. 5235031)
year of construction 2006
1 pc. air conditioner LIBERT HIROSS (Ref. No. 5235032)
year of construction 2005
1 pc. Crockmeter PARAMOUNT EUROPE Meter 1 (Ref. No. 5235035)
year of construction 2003
1 pc. Perspirometer PARAMOUNT EUROPE (Ref. No. 5235037)
year of construction 2004
1 pc. Digiwash-I PARAMOUNT EUROPE NX tm (Ref. No.
5235038)
year of construction 2005
1 pc. tumble dry - precision dryer SDL / PARAMOUNT EUROPE M 223/2 (Ref. No. 5235039)
1 pc. oven + incubator MEMMERT (Ref. No. 5235040)
1 pc. stretch-line (Ref. No. 5234920)
year of construction 2002, second-hand
very good condition, like new
Description of stretching line:
The complete line has 4 blocks:-main Block, -relax block, -spinfinish
block, -cutter
All blocks are connected electrically to a central computer system with
data-storage
and complete control of all process parameters.
1 pc. single arm mixer MIRALLES Model MVP-60 (Ref. No. 5234876)
year of construction : approx. 15 years old, second-hand
lab mixer, used for mixing of pastes
mixer requires a minor repair to the motor as there is some
leakage of oil
1 pc. laboratory needle loom / sample needle loom HUNTER (Ref. No. 2153687)
12 inches working width, year of construction unfortunately not known
with one needle board
motor 440 V / 60 cycles, 3 phases,
machine ready to work
1 pc. climate oven BRABENDER KSE 125/40-N (Ref. No. 5234825)
temperature range: minus 40 to plus 100 C
adjustable humidity: 0-95 %
1 pc. sample carding machine J. HAIGH (Ref. No. 5232354)
12 " working width, year of construction ?
metallic card wire, fully checked over, cleaned and painted
fully guarded with new metal and perspex guards
1 pc. laboratory mangle for use in textile testing (Ref. No.
5234851)
has not been used for a year, but still functions well
robust construction, made from stainless steel, painted mild steel and
rubber
1 pc. carding machine with IDF TRÜTZSCHLER IDF + DFK (Ref. No.
3134761)
year of construction 2002, second-hand, laboratory unit
1 pc. yarn cleanliness tester (Ref. No. 5234633)
year of construction 2001, second-hand
with creel, 2 channel lint tester (warp stop) ENKA TECHNIKA
and wind up made by MÜLLER-FRICK
very good condition
1 pc. testing unit for spinning jets ENKA TECHNIKA OPTOS (Ref. No.
5234638)
1 pc. Zig-Zag-sample cutting machine LIMBURG Imperia E 800 (Ref. No.
5144027)
year of construction 1986, cutting size 820 mm, using size back table 1640
mm
1 pc. tension tester FRANK (Ref. No. 5231966)
table device, with PC etc.
Testing speed can be adjusted. Switch in lower position = fixed speed 100
mm/min. Switch in upper position = variable speed according to adjusted
speed. 1 step on the scale is equal to 1 mm/min.
Clamping length adjustment: 8 steps possible by adjustment ring. Following
distances can be adjusted: 10, 25, 50, 100, 150, 180, 200 and 300 mm.
Power: max. 10 V in each of the two measuring areas.
Adjustable on adjustment potentiometer after removing the cover. Small
allowed load resistance 0,5 MOhm.
Deformation 1 mV/mm traverse way
After removing the cover an adjustment potentiometer can be operated to
correct the signals. The switcher allows to
adjust the signals to ZERO on
each pint of the traverse way.
1 pc. thickness measuring / control unit SOLARTRON (Ref. No.
5223622)
sensors are from manufacturer WEBER
mechanical parts and the software of management have
been developed by the Engineers of the factory
1 pc. laboratory extruder (Ref. No. 3233520)
previously used for Polyethylene
20 mm - 10 kg
with motor, switch board etc.
3 pcs. testing machines (Ref. No. 5233062)
1.) ZELLWEGER Uster Spectrograph type SPG-26
2.) ZELLWEGER Uster Integrator type ITG L-110
3.) ZELLWEGER Uster Evenness Tester type GGP-B-29
1 pc. ZELLWEGER USTER Spin Lab Micronaire Model 675 (Ref. No. 5232760)
year of construction 1995
1 pc. tufting machine CMC OMNI-GRAPH (Ref. No. 6122101)
24 " working width, year of construction 1995 - NEVER USED
special 1/8" gauge, 192 needles, cut pile
sample Omni-Graph tufting machine
equipped with two computer controlled sliding
needle bar attachments, yarn feed (front and rear)
CMC's Advanced cutting system II and complete
with 1/2 H.P. gear motor drive, as new, never used
Top of Page
Second-hand nonwoven machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski
Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand strength testers, measuring machines, pilot lines for research and laboratory, sample carding machines, sample needle looms and similar used laboratory equipment for textiles, nonwovens and fiber spinning.