Coating machinery, second-hand lamination machines, carpet back coating lines, powder coating, paste dot, flat bed and flame lamination
1 pc. Hotmelt coating line NORDSON (Ref. No. 7145390)
380 mm max. application width, year of construction 1995, second-hand
application speed max. 300 m/min
max. speed 400 m/min
application quantity max. 5 grams/sqm
2 unwinder up to 1000 mm diameter
1 re-winder up to 1200 mm diameter
A MELTEX glue applicator is available as a separate
item.
The machine can also be used as a winder/re-winder machine.
The condition is good.
1 pc. finishing machine KRANTZ (Ref. No. 7145324)
1900 mm material width, year of construction 1991, second-hand
suitable for
- ScotchGuarding, application of Teflon-type solutions
- Fire-retardant solutions may be applied.
- Solutions can be applied to harden or soften material for specific
applications
drying of dyed goods, gas-fired
1 pc. foam coating and laminating machine OKAMOTO (Japan) (Ref.
No. 7145311)
1800 mm roll width, year of construction ?, second-hand
- 5 - 20 m/min
- AC 220 V, 50-60 Hz
Composition:
1. Unwinder for the foam with electro brakes 2x
2. Corona treatment (Ahlbrandt systems 2004)
3. Accumulator
4. Reverse roll coater
5. Vacuum unit conveyor (1800 mm)
6. Drying oven 4 meter (steam)
7. Infrared unit 63 kW
8. Guiding system fife to ensure perfect guiding from the film on the foam
9. Laminating unit
10. Cooling rolls 2x
11. Unwinder for the film with electro brakes
12.Corona treatment (Sherman 1998)
13. Coating unit
14. Infrared drying unit 63 kW
15. Cooling rolls 2x
16. Fully automatic winder station + accumulator (2002 BECA)
1 pc. surface treatment line HOME MADE MACHINES (Ref. No. 7145312)
1800 mm working width, year of construction ?, second-hand
1. Unwinder station 2 unwinders with pneumatic brakes
2. Preheating drum heated with hot water
3. Treatment Corona (Sherman treaters 2001)
4. Lackering head KELLER width 1650 mm
5. Vertical drying oven
6. Reverse roll lackering head (Rollmac 1994)
7. Drying oven with belt, 10 meter heated with thermal oil
8. Infrared panel (Weiss Technik) with 4 zones heating
9. 7 preheating rolls
10. Embossing unit with possibility to change automatic for 3 embossing
cylinders
11. Cooling tunnel 3 meter with belt
12. Cooling rolls 2 x
13. Accumulator
14. Winding station
1 pc. embossing / laminating line BRIEM (Ref. No. 7145314)
1600 mm working width, year of construction ?, second-hand
- 2,5 - 25 m/min
Composition:
1. Unwinder station first layer with pneumatic brakes
2. Unwinder station second layer with pneumatic brakes
3. Coating head, 4. Embossing unit, a. Pre-heating roll 2 x (thermal oil)
b. Heating roll (steam), c. Infra-red panel, d. Embossing unit, e. Belt
5. Cooling rolls 3x, 6. Accumulator, 7. Winding station
1 pc. flame lamination line (Ref. No. 7145242)
1800 mm working width, second-hand
2 burners for sandwich system
1 pc. coating line for carpet rolls (Ref. No. 7145238)
2000 mm max. working width, year of construction ?, second-hand
max. roll diameter 1500 mm
suitable for speed up to 15 meters per minute
slot nozzle width 1000 mm
the stenter frame is adjusted to this size
mainly consisting of:
- driven unwinder with linear guide
- drivelss (un)winder
- driven winder
- stenter frame with freewheel drive
- coating head frame
- preheating system
- reheating system
- roller for applying backing
- control system
(without slot nozzle and without hot melt melter)
1 pc. carpet back coating line ARTOS (Ref. No. 7145217)
4000 - 5200 mm working width, year of construction 1968
1 pc. line components such like mixer etc. for latex kitchen (Ref.
No. 7145221)
1 pc. powder scattering and lamination line for thermoplastic
powders LACOM (Ref. No. 7145134)
1000 to 1800 mm working width, year of construction 2000, second-hand
production speed 1-30 m/min
application: 5- 50 gr/sqm
complete with unwinders, weft accumulator, scattering machine,
infrared heating zone, tension control, calander, pressure
roller, re-winder, SPS control Siemens S7, chiller etc.
1 pc. hotmelt glue coating line SPÜHL (Ref. No. 7145123)
1600 mm working width, year of construction ?, second-hand
with press and table
1 pc. coating machine RIMSLOW PRECOAT W 1600 (Ref. No. 7145114)
year of construction 2003
suitable for preparing textiles with inkjet coating for digital
direct print or to give a flame retardant coating to textiles.
1 pc. Kevlar belt for Kannegiesser VK 1000 P (Ref. No. 7144935)
1 pc. flocking line for door mats SCHENK (Ref. No. 7143956)
year of construction end of 80s
has been used in production for approx. 3 to 4 years only
previously used to flock design on door mats of
size: 500 x 700 mm, 600 x 900 mm or two pieces of 400 x 600 mm
suitable for electro static multi colour flocking
1 pc. single side lamination machine YT-LA120-27S (Ref. No.
7144785)
1200 mm and 1900 mm width, year of construction 1999
2 pcs. machines of a hotmelt coating system, in detail: (Ref.
No. 7144719)
1 pc. application head NORDSON type 45-07
as well as
1 pc. melting unit NORDSON MX4411
1 pc. carpet back coating line CAMPEN (Ref. No. 7144561)
5400 mm roller width, year of construction CAMPEN parts 1990, second-hand
Max. min. Width of the line: 5400 - 3000mm
Production speed: 10m/min., Mechanical speed: 15m/min.
Heating system: gas/ ca. 9.3 kWh/cbm, P in total: 350 kW
1 pc. coating machine with two coating stations (Ref. No. 7144084)
2050 mm material width, machine width 2100 mm
1 pc. powder scatterer KNOBEL (Ref. No. 7143989)
2100 mm working width, year of construction not known
(The machine width is wider but the maximum width
for powder scattering is 2100 mm)
1 pc. Hotmelt Lamination Machine MONTI (Ref. No. 7143960)
year of construction 2000
suitable for a wide range of products such like micro fibre
and similar knitted fabric
Previously used to laminate micro fibers with some canvas.
1 pc. combined laminating calander SALADIN 2400 (Ref. No. 7112152)
2400 mm calander width year of construction REFURBISHED
calander diameter 500 mm
1 pressure roller water cooled plus two cooling rollers
1 teflonized oil heating roller up to 250 C
1 pneumatically adjustable press-on rubber belt
(both heating roller and rubber belt allow working as a
continual iron press with a constant temperature,
avoiding the use of a sintering oven, even for heat
sensitive products.)
without electrical installation
refurbished as new
1 pc. powder lamination machine VILLARS (Ref. No. 7142971)
1800 mm roller width, year of construction approx. 1992/93
1.600 mm material width
with powder scatterer and 3.000 mm infrared heating field
with calander
with double band cooling press
with line control (turning frame)
with 4.000 mm accumulator
with batching unit type winder
with cross cutter
with edge trimmer left and right side
with roll take-off
with 2 large accumulators on entry
with 2 unwinders on entry
with cooling device and water tank
1 pc. production line for cleaning sponges BDM Italy type FAR2001 (Ref.
No. 5142099)
1800 mm working width
Principle of production:
- 3 coats of foam plastic glued with fibers are passed into the machine
from for instance 3 rolls or perhaps as sheets. Max. material width 1800
mm
- The 3 coats are cut horizontally in strips of for instance 70 mm width
- The 3 coats are cut across, producing for instance 3 x 25 sponges
- On the belt conveyor from Pos. 3 to 5 the sponges are set on end
changing the base from 7 x 9 cm to about 3 x 9 cm
- The packing machine counts up the sponges (for instance 10 pcs.) and
wrap the sponges in foil, in the same way as wrapping cigarette packages
in foil.
It is possible to put on a self-adhesive label at the same time.
- The package with 10 pcs. Sponges is lead to Pos. 7 by the belt conveyor.
- Cardboard raiser machine/packing machine
This machine automatically forms a cardboard where you can put 50 x 10
pcs. Packages. The cardboard is automatically sealed.
- Finished cardboard
All operations are done by one person only who produces 800-1000 x 10 pcs.
Packages per hour in
the sponge size 7 x 9 x 3 cm per sponge.
- Placement of the person who operates the production process.
The machine can work with preprinted foils and is also able to put on
labels.
1 pc. PU coating line CAMPEN (Ref. No. 7142648)
year of construction 1987
TDI spraying device made by WTS (Weidmann)
Space demand: 32.000 mm x 11.500 mm x 7.000 mm (2 floors each 3.500 mm
height)
The line is installed on 2 floors and needs to be operated by 2 persons.
One infrared field and one steam supplied embossing roller for the Polyurethane
coating
Consisting of: I-Box, Brushing device, steamer, Hot-Box (steam heated)
rectifier with beating roller, cooling field (ventilators),
I-Box for secondary backing (up to 4.200 mm width)
entry control, PU applicator (WTS), drying oven (infrared fields made by
HEREOS)
exit with edge trim, embossing roller (steam operated), accumulator
winder with transport wagons,
The main line components are made by CAMPEN.
The control includes parts made by DANFOSS.
The applicator and the mixing tanks for the PU-part are made by WTS.
A suction unit is included.
1 pc. foam mixer CAMPEN C1CR1000G2 (Ref. No. 7142154)
generally reconditioned, good condition
height: 2.050 mm
length: 2.200 mm
width: 1.300 mm
weight: 900 kg
connection of cooling water 1/2"
connection of compound 2" - 3"
connection of air pressure 3/8"
exit of mixing head 2"
Top of Page
Second-hand nonwoven machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski
Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand coating machines, lamination machinery, carpet back coating lines, powder coating machines, paste dot coating machinery and flame lamination lines.